Seal N Shine Concrete Glaze & Sealer
A Cloverdale exterior finish. Finish: Gloss. Applications include concrete & masonry.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A Cloverdale exterior finish. Finish: Gloss. Applications include concrete & masonry.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 45110 |
|---|---|
| Sheen | Gloss |
| Category | Exterior Topcoat |
| Chemistry | Alkyd |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 21.5% |
| Weight solids | 27% |
| Density | 7.67 lbs per gallon. Container extra |
| Film thickness | Wet: 3.2 - 5.3 mils (80 - 133 microns) Dry: 0.7 - 1.1 mils (18 - 28 microns) |
| Viscosity | 20 - 30 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Seal N Shine Concrete Glaze & Sealer
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 45110 - Seal 'n' Shine Concrete Glaze & Sealer (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A Cloverdale exterior finish. Finish: Gloss. Applications include concrete & masonry.
Recommended uses
concrete & masonry.
Exterior & decks Exterior surfaces- Finish
Gloss
- Coverage
300 - 500 ft² per gallon (7.4 - 12.3 m²/L)
- Application method
Brush: Bristle Brush or lambs wool applicator Roller: 5 -10mm solvent resistant sleeve
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 30 minutes
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Designed for a short drying time.
- Designed to withstand abrasion.
- Product Code
- 45110
- Sheen
- Gloss
- Category
- Exterior Topcoat
- Chemistry
- Alkyd
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 21.5%
- Weight solids
- 27%
- Density
- 7.67 lbs per gallon. Container extra
- Film thickness
- Wet: 3.2 - 5.3 mils (80 - 133 microns) Dry: 0.7 - 1.1 mils (18 - 28 microns)
- Viscosity
- 20 - 30 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Gloss
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Seal N Shine Concrete Glaze & Sealer