Fine Finish Low Pressure RAC X FF LP SwitchTip
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 510 Fine Finish Low Pressure (FF LP) RAC X SwitchTip.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 510 Fine Finish Low Pressure (FF LP) RAC X SwitchTip.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Compatible Material | Primer, Stain, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints |
|---|---|
| For Use With | RAC X HandTite Tip Guard |
| Material | Tungsten Carbide |
| Maximum Fan Width (in) | 10 |
| Maximum Flow Rate (GPM) | 0.11 |
| Maximum Working Pressure (psi) | 4050 |
| Minimum Fan Width (in) | 10 |
| Model | RAC X |
| Orifice Diameter (in) | 0.010 |
| Pattern Size (in) | 10 to 12 |
| Series | FF LP SwitchTip |
| Spray Pattern | Fan |
| Tip Type | Airless |
| Type | Spray Tip |
| Maximum Fan Width (cm) | 25 |
| Maximum Fan Width (mm) | 305 |
| Maximum Flow Rate (L/min) | 0.42 |
| Maximum Working Pressure (bar) | 280 |
| Maximum Working Pressure (kPa) | 28000 |
| Minimum Fan Width (mm) | 254 |
| Pattern Size (mm) | 254 to 304.8 |
| Manufacturer part number | fflp510 |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Product images are shown for reference; packaging and options may differ from your selection.
All options15 options
-
108
Product code fflp108
View this option ↗
-
110
Product code fflp110
View this option ↗
-
208
Product code fflp208
View this option ↗
-
210
Product code fflp210
View this option ↗
-
212
Product code fflp212
View this option ↗
-
214
Product code fflp214
View this option ↗
-
308
Product code fflp308
View this option ↗
-
310
Product code fflp310
View this option ↗
-
312
Product code fflp312
View this option ↗
-
314
Product code fflp314
View this option ↗
-
408
Product code fflp408
View this option ↗
-
410
Product code fflp410
View this option ↗
-
414
Product code fflp414
View this option ↗
-
510
Product code fflp510
Currently viewing
-
514
Product code fflp514
View this option ↗
Full product details, applications & manufacturer specifications
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 510 Fine Finish Low Pressure (FF LP) RAC X SwitchTip.
This fine finish tip produces a 10 to 12 inch Fan pattern and has a 0.010 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
Recommended uses
Tools & equipment, Commercial.
- Compatible Material
- Primer, Stain, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints
- For Use With
- RAC X HandTite Tip Guard
- Material
- Tungsten Carbide
- Maximum Fan Width (in)
- 10
- Maximum Flow Rate (GPM)
- 0.11
- Maximum Working Pressure (psi)
- 4050
- Minimum Fan Width (in)
- 10
- Model
- RAC X
- Orifice Diameter (in)
- 0.010
- Pattern Size (in)
- 10 to 12
- Series
- FF LP SwitchTip
- Spray Pattern
- Fan
- Tip Type
- Airless
- Type
- Spray Tip
- Maximum Fan Width (cm)
- 25
- Maximum Fan Width (mm)
- 305
- Maximum Flow Rate (L/min)
- 0.42
- Maximum Working Pressure (bar)
- 280
- Maximum Working Pressure (kPa)
- 28000
- Minimum Fan Width (mm)
- 254
- Pattern Size (mm)
- 254 to 304.8
- Manufacturer part number
- fflp510
Product & project gallery
Complete your project.
Companion products for the selected product and system.
RAC X HandTite Tip Guard
The matching RAC X guard for this spray-tip system.
Fits a compatible 7/8-inch gun thread. Match the tip, guard and seal; keep within the lowest pressure rating of the assembled system.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Fine Finish Low Pressure RAC X FF LP SwitchTip