WeatherOne® 100% Acrylic Semi-Transparent Stain
A water-based, semi-transparent acrylic stain that allows the natural grain of exterior wood to remain visible. It produces a low-sheen decorative finish and develops water resistance as it dries.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A water-based, semi-transparent acrylic stain that allows the natural grain of exterior wood to remain visible. It produces a low-sheen decorative finish and develops water resistance as it dries.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 06680 |
|---|---|
| Sheen | Wood Stain |
| Category | Wood Stain |
| Chemistry | 100% Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 16% |
| Weight solids | 17% |
| Density | 8.4lbs per gallon. Container extra |
| Film thickness | Wet: 5.0 - 6.0 mils (130 - 150 microns) Dry: 0.9 - 1.0 mils (22 - 25 microns) |
| Viscosity | 25 - 30 Ford Cup #4 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
WeatherOne® 100% Acrylic Semi-Transparent Stain
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 06680 - WeatherOne® 100% Acrylic Semi-Transparent Stain (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A water-based, semi-transparent acrylic stain that allows the natural grain of exterior wood to remain visible. It produces a low-sheen decorative finish and develops water resistance as it dries.
Where to use it
Exterior wood surfaces. The clear tint base must be tinted as directed by the manufacturer.
Recommended uses
Exterior wood surfaces. The clear tint base must be tinted as directed by the manufacturer.
Cabinetry Decks Exterior siding Wood & cabinetry Wood finishing- Finish
Wood Stain
- Coverage
250 - 300 ft² per gallon (6.0 - 7.4 m²/L)
- Application method
Brush application preferred. Brush: Use a synthetic brush Roller: Use a 3/8” - 3/4” nap synthetic cover H.V.L.P. Spray: 5 - 10 psi, #3 needle set Airless Spray: Pressure 2000 psi, Tip .011” - .013”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 15 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 1 hour
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Low-VOC formulation.
- Designed for a short drying time.
- Can function as its own primer where the technical sheet permits.
- Designed to withstand abrasion.
- Water-based formulation.
- Product Code
- 06680
- Sheen
- Wood Stain
- Category
- Wood Stain
- Chemistry
- 100% Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 16%
- Weight solids
- 17%
- Density
- 8.4lbs per gallon. Container extra
- Film thickness
- Wet: 5.0 - 6.0 mils (130 - 150 microns) Dry: 0.9 - 1.0 mils (22 - 25 microns)
- Viscosity
- 25 - 30 Ford Cup #4 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
WeatherOne semi-transparent stain chart
Use this chart for WeatherOne semi-transparent stain, not the solid-hide product. Test on the wood being finished.
Screen colours are approximate. Confirm your choice with a physical sample. Wood species, fabric opacity, preparation and the coating system can affect the result.
- Sheen
- Wood Stain
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about WeatherOne® 100% Acrylic Semi-Transparent Stain