Formworx Latex Block Filler
A Cloverdale primer or sealer. Finish: Primer – Sealer. Applications include concrete & masonry.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A Cloverdale primer or sealer. Finish: Primer – Sealer. Applications include concrete & masonry.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 05700 |
|---|---|
| Sheen | Primer - Sealer |
| Category | Primer, Sealer, Undercoat |
| Chemistry | Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 50% |
| Weight solids | 69% |
| Film thickness | Wet: 12.8 - 21.4 mils (325 - 544 microns) Dry: 7.0 - 12.0 mils (178 - 305 microns) |
| Viscosity | 110 - 120 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Formworx Latex Block Filler
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 05700 - Formworx Latex Block Filler (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A Cloverdale primer or sealer. Finish: Primer – Sealer. Applications include concrete & masonry.
Recommended uses
concrete & masonry.
Priming & sealing- Finish
Primer - Sealer
- Coverage
65 - 115 ft² per gallon (1.6 - 2.8 m²/L)
- Application method
Stir well before and during use. Best results are achieved when using a heavy pile roller or power roller system. Airless spray application accompanied with back rolling is also a recommended application technique. Recommended tip sizes: 0.023"- 0.029". Always apply coating at the recommended spread rate.
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 45 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 2 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product Code
- 05700
- Sheen
- Primer - Sealer
- Category
- Primer, Sealer, Undercoat
- Chemistry
- Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 50%
- Weight solids
- 69%
- Film thickness
- Wet: 12.8 - 21.4 mils (325 - 544 microns) Dry: 7.0 - 12.0 mils (178 - 305 microns)
- Viscosity
- 110 - 120 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Primer - Sealer
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Formworx Latex Block Filler