Skip to content
← Cloverdale Paint / Paint & Primers
Cloverdale Paint · Paint & Primers

Porch & Floor 100% Acrylic Finish

A 100% acrylic floor finish for interior and exterior wood and concrete. The low-odour, pearl-sheen coating is intended for household and light industrial applications.

Porch & Floor 100% Acrylic Finish product image
Porch & Floor 100% Acrylic Finish
THE MANUFACTURERCloverdale Paint

Protective coatings.
Local knowledge.

Chemistry100% Acrylic Latex
SheenPearl or Satin
THE RIGHT START MATTERS

KNOW THE
SURFACE.
PLAN THE
COATING.

A 100% acrylic floor finish for interior and exterior wood and concrete. The low-odour, pearl-sheen coating is intended for household and light industrial applications.

Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.

Get into the details
A finished walnut floor in a dining room
Project inspirationIllustrative project scene; not a documented installation of this product.
01 / CHECK

The surface.

Identify the material, its condition and the work you’re planning.

02 / PLAN

The system.

Confirm product suitability, preparation and compatibility with our team.

03 / CONFIRM

The conditions.

Check the current manufacturer instructions for application, installation or maintenance requirements.

PRODUCT SPECIFICATIONS

THE DETAILS.
ALL HERE.

Keep the technical information close.
Use the current manufacturer documents when planning the work.

Open the document centre
Porch & Floor 100% Acrylic Finish product specifications
Product Code02503
SheenPearl or Satin
CategoryInterior Topcoat / Exterior Topcoat
Chemistry100% Acrylic Latex
Catalogue rangeArchitectural / wood finishing
Volume solids33%
Weight solids43%
Film thicknessWet: 3.6 - 4.6 mils (92 - 177 microns) Dry: 1.2 - 1.6 mils (30 - 41 microns)
Viscosity70 - 75 KU
ThinningNot normally recommended.
THE DOCUMENT CENTRE

KNOW BEFORE
YOU COAT.

Technical information.
Safety information.
Ready when you need it.

Check the product label and current manufacturer documents for the exact component, colour and region before use.

Full product details, applications & manufacturer specifications

A 100% acrylic floor finish for interior and exterior wood and concrete. The low-odour, pearl-sheen coating is intended for household and light industrial applications.

Where to use it

Steps, wood and concrete floors, basement and utility-room floors, patios and porches. Avoid garage floors and heavy industrial applications; vehicle tyres can pull this coating away from a garage floor.

Steps, wood and concrete floors, basement and utility-room floors, patios and porches. Avoid garage floors and heavy industrial applications; vehicle tyres can pull this coating away from a garage floor.

Commercial Concrete & masonry Exterior & decks Exterior surfaces Interior walls Residential
Finish

Pearl or Satin

Coverage

350 - 450 ft² per gallon (8.0 - 11.0 m²/L)

Application method

Brush, Roll or Spray

Drying time

at 25°C (77°F) and 50% Relative Humidity Tack Free: 45 minutes

Recoat time

at 25°C (77°F) and 50% Relative Humidity Re-Coat: 8 hours minimum. Allow 24 hours before

Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.

Features

  • Designed for a short drying time.
Product Code
02503
Sheen
Pearl or Satin
Category
Interior Topcoat / Exterior Topcoat
Chemistry
100% Acrylic Latex
Catalogue range
Architectural / wood finishing
Volume solids
33%
Weight solids
43%
Film thickness
Wet: 3.6 - 4.6 mils (92 - 177 microns) Dry: 1.2 - 1.6 mils (30 - 41 microns)
Viscosity
70 - 75 KU
Thinning
Not normally recommended.
COLOUR / FINISH / POSSIBILITIES

Colours &
finish options.

Explore the published colour and finish information for this product.

PRODUCT COLOUR COLLECTION

Cloverdale Porch & Floor colours

8 of 52 references

Official Porch & Floor colour references. The separate sport-court palette is not included.

  • ChromiumEX219
  • Light GreyEX231
  • Alta LakeEX233
  • SandwashedEX247
  • ThundereggEX243
  • Cast IronEX239
  • WalkwayEX259
  • HopsEX269
View the full product colour collection

Screen colours are approximate. Confirm your choice with a physical sample. Wood species, fabric opacity, preparation and the coating system can affect the result.

PRODUCT FINISH
Sheen
Pearl or Satin

Explore related categories

SUPERIOR COATINGS / THUNDER BAY

BIG PROJECT?
LET’S TALK.

Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.

Ask about Porch & Floor 100% Acrylic Finish
VISIT SUPERIOR COATINGS

Find us in Thunder Bay.

550 Fort William Road
Thunder Bay, Ontario

Call 807-345-4511 ↗

550 Fort William Road, Thunder Bay

Compare your products

Ask our team ↗

Swipe across to compare products. Detail labels stay visible.

Check official product documents and confirm suitability with our team.

YOUR IDEAS, TOGETHER

My Projects

YOUR PROJECTS, WHEREVER YOU ARE

Keep your plans close.

Create a free account to pick up your projects on another device. Your saved colours, products and notes come with you.

How saved projects and account information work (opens in a new tab)