Latex Dryfall
A water-based acrylic semi-gloss dryfall coating for commercial and industrial ceilings. Under the manufacturer’s stated conditions, overspray falling more than 20 feet can be swept up.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A water-based acrylic semi-gloss dryfall coating for commercial and industrial ceilings. Under the manufacturer’s stated conditions, overspray falling more than 20 feet can be swept up.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 05135 |
|---|---|
| Sheen | Semi-Gloss |
| Category | Interior Topcoat |
| Chemistry | Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 25% |
| Weight solids | 36% |
| Film thickness | Wet: 6.0 - 10.0 mils (150 - 250 microns) Dry: 1.5 - 2.5 mils (38 - 63 microns) |
| Viscosity | 90 - 95 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Latex Dryfall Semi Gloss White Base
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 05135 - Latex Dryfall Semi Gloss White Base (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Product images are shown for reference; packaging and options may differ from your selection.
Full product details, applications & manufacturer specifications
A water-based acrylic semi-gloss dryfall coating for commercial and industrial ceilings. Under the manufacturer’s stated conditions, overspray falling more than 20 feet can be swept up.
Where to use it
Commercial and industrial ceilings; confirm the required height and drying conditions before use.
Recommended uses
Commercial and industrial ceilings; confirm the required height and drying conditions before use.
Interior walls & ceilings Metal surfaces- Finish
Semi-Gloss
- Coverage
160 - 270 ft² per gallon (3.9 - 6.6 m²/L)
- Application method
H.V.L.P Spray: 10 psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .013” - .015”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 15 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 2 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Designed for a short drying time.
- Water-based formulation.
- Product Code
- 05135
- Sheen
- Semi-Gloss
- Category
- Interior Topcoat
- Chemistry
- Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 25%
- Weight solids
- 36%
- Film thickness
- Wet: 6.0 - 10.0 mils (150 - 250 microns) Dry: 1.5 - 2.5 mils (38 - 63 microns)
- Viscosity
- 90 - 95 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
Latex Dryfall semi-gloss
Confirm the current colour formula for this industrial ceiling coating.
- White base05135
- Sheen
- Semi-Gloss
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Latex Dryfall