SharkSkin® Mill Glaze Remover
SharkSkin® Mill Glaze Remover is a sodium-borate preparation product for new or old wood. It opens wood pores and removes dirt and acid build-up to prepare the surface for waterborne coatings.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
SharkSkin® Mill Glaze Remover is a sodium-borate preparation product for new or old wood. It opens wood pores and removes dirt and acid build-up to prepare the surface for waterborne coatings.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 80319 |
|---|---|
| Catalogue range | Architectural / wood finishing |
| Film thickness | Wet: - mils |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
SharkSkin® Mill Glaze Remover
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 80319 - SharkSkin Mill Glaze Remover (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
SharkSkin® Mill Glaze Remover is a sodium-borate preparation product for new or old wood. It opens wood pores and removes dirt and acid build-up to prepare the surface for waterborne coatings.
Where to use it
For wood decks, fences, railings, siding, log homes, cedar shakes and gazebos before staining or painting.
Preparation
Follow the current label for mixing, application, rinsing and drying before coating.
Application and limitations
Read the label and safety sheet and confirm compatibility with the intended stain or paint.
Exterior project planning
- Air temperature
- Check manufacturer instructions
- Surface temperature
- Check manufacturer instructions
No numeric air or surface temperature or rain-free interval is published in the linked manufacturer directions. Mix the powder with warm water above 27°C; this is mixing-water temperature, not outdoor air. Work for 5–15 minutes, agitate and rinse. Let wood become dry to the touch before coating.
Check the air, the actual surface, overnight conditions and the full drying or curing period. The current product label takes precedence.
Recommended uses
decks, exterior siding.
Wood cleaning & preparationFeatures
- Water-based formulation.
- Product Code
- 80319
- Catalogue range
- Architectural / wood finishing
- Film thickness
- Wet: - mils
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about SharkSkin® Mill Glaze Remover