Sikafloor® Extender T
Sikafloor® Extender T is an inert, fine, white, fibrous polymer powder used as a thickening agent for Sikafloor® epoxy systems.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
Sikafloor® Extender T is an inert, fine, white, fibrous polymer powder used as a thickening agent for Sikafloor® epoxy systems.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Packaging | 1 kg packaged in a 18.9 L plastic pail. Note: Sika® measuring cup enclosed in each pail / each cup holds approx 18 g. Approximately 55 of Sikafloor® Extender T measuring cups are weighed-out from each 1 kg. |
|---|---|
| APPROVALS / CERTIFICATES | Meets the requirements of CFIA for use in food plants |
| Shelf Life | 3 years in original unopened packaging. |
| Storage Conditions | Store dry between 10 °C to 25 °C (50 °F to 77 °F). Protect from contact with moisture during storage, Sikafloor® Extender T must be kept dry. |
| Volatile organic compound (VOC) content | ~ 0 g/L |
| MIXING | IMPORTANT: Do not hand mix Sikafloor® products; mechanical mix only. Mix Sika® resin components A + B following individual mixing instructions published on the Product Data Sheet or label. Add Sikafloor® Extender T (powder) pouring slowly over a period of 15 seconds to avoid lumps in the final mixture. Mechanically blend for two (2) more minutes, during the operations, scrape down the sides and bottom of the container with a flat or straight edge trowel at least once (components A+B+Sikafloor® Extender T) to ensure complete mixing. Do not attempt to attend to unmixed material that may gather on the sides of the mixing container while mechanical or electrical parts are in motion. When completely mixed, Sikafloor® Extender T should be uniform in appearance and consistency. |
| VOC | ~ 0 g/L |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Sikafloor® Extender T
Product Data Sheet (PDS) · Sikafloor® Extender T
Read the full product requirements, application instructions and limitations.
Technical document · Sikafloor® Extender T
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Sikafloor® Extender T is an inert, fine, white, fibrous polymer powder used as a thickening agent for Sikafloor® epoxy systems.
Recommended uses
In combination with: Sikafloor®-156 CA, Sikafloor®-261 CA, Sikagard®-381, Sikafloor® Fastflor® CR, Sikagard®-62 CA and other Sika® epoxy systems. For applications on horizontal surfaces to create custom orange peel textures. For applications on vertical surfaces to hold the resin in place during cure. To create a thin set, fine texture, crack filler and patching gel.
FloorsFeatures
- Allows viscosity adjustment during Sikafloor® product application to suit site conditions.
- Economical, easy to mix and use.
- No effect on pot life or cure rate.
- Low addition rate to change viscosity when compared to other epoxy thickening agents.
- Non carcinogenic.
- Inert, non-reactive filler.
- Packaging
- 1 kg packaged in a 18.9 L plastic pail. Note: Sika® measuring cup enclosed in each pail / each cup holds approx 18 g. Approximately 55 of Sikafloor® Extender T measuring cups are weighed-out from each 1 kg.
- APPROVALS / CERTIFICATES
- Meets the requirements of CFIA for use in food plants
- Shelf Life
- 3 years in original unopened packaging.
- Storage Conditions
- Store dry between 10 °C to 25 °C (50 °F to 77 °F). Protect from contact with moisture during storage, Sikafloor® Extender T must be kept dry.
- Volatile organic compound (VOC) content
- ~ 0 g/L
- MIXING
- IMPORTANT: Do not hand mix Sikafloor® products; mechanical mix only. Mix Sika® resin components A + B following individual mixing instructions published on the Product Data Sheet or label. Add Sikafloor® Extender T (powder) pouring slowly over a period of 15 seconds to avoid lumps in the final mixture. Mechanically blend for two (2) more minutes, during the operations, scrape down the sides and bottom of the container with a flat or straight edge trowel at least once (components A+B+Sikafloor® Extender T) to ensure complete mixing. Do not attempt to attend to unmixed material that may gather on the sides of the mixing container while mechanical or electrical parts are in motion. When completely mixed, Sikafloor® Extender T should be uniform in appearance and consistency.
- VOC
- ~ 0 g/L
Colours &
finish options.
Explore the published colour and finish information for this product.
Fine white powder
Confirm the colour, finish and availability with our team and a physical sample.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Sikafloor® Extender T