Skip to content
← Chemcraft / Wood Care & Finishes
Chemcraft · Wood Care & Finishes

117-25XX CHEMLIFE® 24 PLUS White CV Pigmented TC

CHEMLIFE 24 PLUS White Topcoat is an acid curing, light stable, fast drying Reactive Amino Coating (RAC) with good building properties.

117-25XX CHEMLIFE® 24 PLUS White CV Pigmented TC product image
117-25XX CHEMLIFE® 24 PLUS White CV Pigmented TC
THE MANUFACTURERChemcraft

Protective coatings.
Local knowledge.

Mixing ratio100 parts 117-25XX to 10 part 873-1251
THE RIGHT START MATTERS

KNOW THE
SURFACE.
PLAN THE
COATING.

CHEMLIFE 24 PLUS White Topcoat is an acid curing, light stable, fast drying Reactive Amino Coating (RAC) with good building properties.

Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.

Get into the details
Cabinet doors prepared for finishing
Project inspirationIllustrative project scene; not a documented installation of this product.
01 / CHECK

The surface.

Identify the material, its condition and the work you’re planning.

02 / PLAN

The system.

Confirm product suitability, preparation and compatibility with our team.

03 / CONFIRM

The conditions.

Check the current manufacturer instructions for application, installation or maintenance requirements.

PRODUCT SPECIFICATIONS

THE DETAILS.
ALL HERE.

Keep the technical information close.
Use the current manufacturer documents when planning the work.

Open the document centre
117-25XX CHEMLIFE® 24 PLUS White CV Pigmented TC product specifications
Coating rangePost-catalyzed
ViscosityZahn #3 signature cup 23-25 sec at 25°C
Flash Point53.6°F (12°C)
Density (kg/l)1.12
Solid (% by weight)59.91%
Solid (% by volume)44.8%
Shelf Life (months)12
Density1.12 kg/L
Weight solids59.91%
Volume solids44.8%
Shelf life12 months
VOC<449 g/L
Recommended wet film5 mils
Mixing ratio100 parts 117-25XX to 10 part 873-1251
Pot life24 hours
CleanupLacquer thinner
Thinning121-803 or 121-8020
THE DOCUMENT CENTRE

KNOW BEFORE
YOU COAT.

Technical information.
Safety information.
Ready when you need it.

Check the product label and current manufacturer documents for the exact component, colour and region before use.

Full product details, applications & manufacturer specifications

CHEMLIFE 24 PLUS White Topcoat is an acid curing, light stable, fast drying Reactive Amino Coating (RAC) with good building properties.

It gives a smooth, knock proof and hardwearing surface resisting influence from alcohol, water, etc. Due to its 24 hour pot-life, CHEMLIFE 24 PLUS White Topcoat provides the customer with minimum waste resulting in lower production costs. It also provides very good light stability based on the type of resin used and superior vertical hang. Special Recognition: When applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test.

Recommended: Architectural Woodwork Institute (AWI) O.P.4.

Cabinets, Furniture

Coverage

719 sq. ft/gal (17 m2/l) at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Drying time

Room temperature (20°C / 68°F): Tack Free Time: 15 – 20 minutes Dry to Sand: 3 hours

Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.

Coating range
Post-catalyzed
Viscosity
Zahn #3 signature cup 23-25 sec at 25°C
Flash Point
53.6°F (12°C)
Density (kg/l)
1.12
Solid (% by weight)
59.91%
Solid (% by volume)
44.8%
Shelf Life (months)
12
Density
1.12 kg/L
Weight solids
59.91%
Volume solids
44.8%
Shelf life
12 months
VOC
<449 g/L
Recommended wet film
5 mils
Mixing ratio
100 parts 117-25XX to 10 part 873-1251
Pot life
24 hours
Cleanup
Lacquer thinner
Thinning
121-803 or 121-8020

Complete your project.

Companion products for the selected product and system.

  • 873-1251 Chemlife® 24 Catalyst

    The specified catalyst for this Chemlife 24 coating.

    Use the specified 10% catalyst addition and follow the current mixing, pot-life and curing requirements. Industrial application only.

  • 121-8020 Slow Reducer

    A listed reducer for adjusting the application viscosity.

    Use only when needed and at the amount specified in the coating’s current Canadian product sheet; do not substitute it for the catalyst.

Explore related categories

SUPERIOR COATINGS / THUNDER BAY

BIG PROJECT?
LET’S TALK.

Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.

Ask about 117-25XX CHEMLIFE® 24 PLUS White CV Pigmented TC
VISIT SUPERIOR COATINGS

Find us in Thunder Bay.

550 Fort William Road
Thunder Bay, Ontario

Call 807-345-4511 ↗

550 Fort William Road, Thunder Bay

Compare your products

Ask our team ↗

Swipe across to compare products. Detail labels stay visible.

Check official product documents and confirm suitability with our team.

YOUR IDEAS, TOGETHER

My Projects

YOUR PROJECTS, WHEREVER YOU ARE

Keep your plans close.

Create a free account to pick up your projects on another device. Your saved colours, products and notes come with you.

How saved projects and account information work (opens in a new tab)