421-72XX Plastofix® Light Post-Cat Clear Topcoat
Plastofix Light is a light stable, fast drying Reactive Amino Coating. It gives a smooth, knock proof and hard wearing surface resisting influence from alcohol, water, etc. meant for interior use. Plastofix Light has improved light stability versus our standard Plastofix.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
Plastofix Light is a light stable, fast drying Reactive Amino Coating. It gives a smooth, knock proof and hard wearing surface resisting influence from alcohol, water, etc. meant for interior use. Plastofix Light has improved light stability versus our standard Plastofix.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Coating range | Post-catalyzed |
|---|---|
| Viscosity | Zahn #2 signature cup 55 sec at 25°C |
| Flash Point | 15°C (59°F) |
| Density (kg/l) | 1.00 |
| Solid (% by weight) | 54% |
| Solid (% by volume) | 46% |
| Shelf Life (months) | 12 |
| Density | 1.00 kg/L |
| Weight solids | 54% |
| Volume solids | 46% |
| Shelf life | 12 months |
| VOC | 450 g/L |
| Recommended wet film | 3-5 wet mils |
| Mixing ratio | 8% 873-0870 or 999-017 by volume |
| Pot life | 8 hours |
| Cleanup | Lacquer Thinner |
| Thinning | 121-8020 or 121-803 |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Plastofix Light is a light stable, fast drying Reactive Amino Coating. It gives a smooth, knock proof and hard wearing surface resisting influence from alcohol, water, etc. meant for interior use. Plastofix Light has improved light stability versus our standard Plastofix.
Recommended uses
Wood finishing- Coverage
17-18 m2/l at 1 mil dry and at 100% efficiency. Coverage will vary depending on method of application or coating thickness.
- Application method
Spray
- Drying time
Room temperature (20°C / 68°F): Tack Free Time: 20 minutes Dry to Sand: 6 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Coating range
- Post-catalyzed
- Viscosity
- Zahn #2 signature cup 55 sec at 25°C
- Flash Point
- 15°C (59°F)
- Density (kg/l)
- 1.00
- Solid (% by weight)
- 54%
- Solid (% by volume)
- 46%
- Shelf Life (months)
- 12
- Density
- 1.00 kg/L
- Weight solids
- 54%
- Volume solids
- 46%
- Shelf life
- 12 months
- VOC
- 450 g/L
- Recommended wet film
- 3-5 wet mils
- Mixing ratio
- 8% 873-0870 or 999-017 by volume
- Pot life
- 8 hours
- Cleanup
- Lacquer Thinner
- Thinning
- 121-8020 or 121-803
Complete your project.
Companion products for the selected product and system.
999-017 Catalyst
One of the specified catalysts for Plastofix Light.
Use the specified 8% addition by volume and follow the eight-hour pot-life schedule. Do not substitute a Chemlife catalyst.
390-0060 ES Sealer Pre-Cat Clear Sealer
A named sealer option beneath Plastofix Light.
The topcoat can also self-seal; choose the full approved system and follow sanding and overcoating instructions.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about 421-72XX Plastofix® Light Post-Cat Clear Topcoat