440-XXX Plasticolor White Conversion Varnish Pigmented Topcoat
Plasticolor White is an acid curing high-solids fast drying Reactive Amino Coating (RAC) with good building properties. This is a fast building product due to its high solid content (53% volume). It gives a smooth, knock-proof and hardwearing surface resisting influence from alcohol, water, etc.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
Plasticolor White is an acid curing high-solids fast drying Reactive Amino Coating (RAC) with good building properties. This is a fast building product due to its high solid content (53% volume). It gives a smooth, knock-proof and hardwearing surface resisting influence from alcohol, water, etc.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Coating range | Post-catalyzed |
|---|---|
| Viscosity | Zahn #4 signature cup 30 sec at 25°C |
| Flash Point | 27°C |
| Density (kg/l) | 1.21 ± 2% at 25°C |
| Solid (% by weight) | 67 ± 1% |
| Solid (% by volume) | 53 ± 1% |
| Shelf Life (months) | 12 |
| Density | 1.21 ± 2% at 25°C kg/L |
| Weight solids | 67 ± 1% |
| Volume solids | 53 ± 1% |
| Shelf life | 12 months |
| VOC | 401 g/L |
| Recommended wet film | 3 to 5 mils wet |
| Mixing ratio | 10% 873-0870 or 999-017 |
| Pot life | 8 hours |
| Cleanup | Lacquer Thinner |
| Thinning | 121-8020 or 121-803 |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Plasticolor White is an acid curing high-solids fast drying Reactive Amino Coating (RAC) with good building properties. This is a fast building product due to its high solid content (53% volume). It gives a smooth, knock-proof and hardwearing surface resisting influence from alcohol, water, etc.
Recommended uses
Cabinets, Furniture
- Coverage
21 m2/l (225 pi2/l) at 1 mil dry and at 100% efficiency. Coverage will vary depending on method of application or coating thickness.
- Application method
Spray
- Drying time
Room temperature (20°C / 68°F): Tack Free Time: 30 - 45 minutes Dry to Sand: 90 - 120 minutes
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Coating range
- Post-catalyzed
- Viscosity
- Zahn #4 signature cup 30 sec at 25°C
- Flash Point
- 27°C
- Density (kg/l)
- 1.21 ± 2% at 25°C
- Solid (% by weight)
- 67 ± 1%
- Solid (% by volume)
- 53 ± 1%
- Shelf Life (months)
- 12
- Density
- 1.21 ± 2% at 25°C kg/L
- Weight solids
- 67 ± 1%
- Volume solids
- 53 ± 1%
- Shelf life
- 12 months
- VOC
- 401 g/L
- Recommended wet film
- 3 to 5 mils wet
- Mixing ratio
- 10% 873-0870 or 999-017
- Pot life
- 8 hours
- Cleanup
- Lacquer Thinner
- Thinning
- 121-8020 or 121-803
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about 440-XXX Plasticolor White Conversion Varnish Pigmented Topcoat