3M™ Reinforced Filler for DMS, 05877, 9.3 fl. oz. (276 ml) DMS Cartridge, 6/Case
3M™ Reinforced Filler for DMS is a two-component, resin-rich filler that offers easier mixing and dispensing through the 3M™ Dynamic Mixing System.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
3M™ Reinforced Filler for DMS is a two-component, resin-rich filler that offers easier mixing and dispensing through the 3M™ Dynamic Mixing System.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| 3M Stock | 7000120099 |
|---|---|
| Previous 3M Stock | 60455052583 |
| UPC | 00051131058774 |
| Alternative ID | 05877 |
Full product details, applications & manufacturer specifications
3M™ Reinforced Filler for DMS is a two-component, resin-rich filler that offers easier mixing and dispensing through the 3M™ Dynamic Mixing System.
The system efficiently mixes the filler and hardener so that it is ready to use immediately upon being dispensed, saving automotive technicians time and effort by eliminating hand mixing. Our 3M™ Reinforced Filler for DMS contains milled fibreglass and is packaged in a dual cartridge system. Our reinforced filler offers excellent adhesion to steel, galvanized steel, aluminum, E-coat, SMC and FRP.
It provides additional strength when deeper fill and gap spanning capability are needed. This filler is ideal for weld seams, SMC, and FRP. 3M™ Reinforced Filler for DMS streamlines the process of mixing filler and hardener. Instead of manually mixing filler and hardener on a board with a spreader, the 3M™ Dynamic Mixing System delivers the right ratio of hardener and filler. The filler may be applied to the vehicle straight from the dispenser with the simple touch of a trigger on the 3M™ Dynamic Mixing System applicator.
Recommended uses
Automotive Body Repair
- 3M Stock
- 7000120099
- Previous 3M Stock
- 60455052583
- UPC
- 00051131058774
- Alternative ID
- 05877
Complete your project.
Companion products for the selected product and system.
Bondo Spreader · PLASTIC SPREADERS – 3 PACK
A flexible spreader for shaping the mixed filler or glaze.
Use a clean spreader for application. Mix or dispense the product with its specified hardener and equipment first; a spreader does not replace a DMS applicator or mixing nozzle. Apply within the filler’s working time.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about 3M™ Reinforced Filler for DMS, 05877, 9.3 fl. oz. (276 ml) DMS Cartridge, 6/Case