Interlux Fiberglass Surface Prep
It’s extremely important to remove contaminants from fibreglass for full adhesion of primers and/or antifouling paints. With its special low VOC formula, Fibreglass Surface Prep does this extremely effectively. It can also be used to remove amine blush from clear epoxy.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
It’s extremely important to remove contaminants from fibreglass for full adhesion of primers and/or antifouling paints. With its special low VOC formula, Fibreglass Surface Prep does this extremely effectively. It can also be used to remove amine blush from clear epoxy.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Above-waterline areas | Bilge/Lockers, Deck - smooth, Exterior cabin/trims, Interior cabin/trims |
|---|---|
| Below-waterline areas | Hull |
| Compatible systems | 1 pack system |
| Product type | Primers |
| Manufacturer colours | (YMA601) |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Interlux Fiberglass Surface Prep
Fiberglass Surface Prep Low VOC USA · TDS
Read the full product requirements, application instructions and limitations.
SDS · FIBERGLASS SURFACE PREP N/A (Canada, English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
It’s extremely important to remove contaminants from fibreglass for full adhesion of primers and/or antifouling paints. With its special low VOC formula, Fibreglass Surface Prep does this extremely effectively. It can also be used to remove amine blush from clear epoxy.
Recommended uses
Marine primers
- Application method
Brush, Roller
- Drying time
Overcoating Substrate Temperature 5°C (41°F) 10°C (50°F) 23°C (73°F) 35°C (95°F) Overcoated By Min Max Min Max Min Max Min Max
- Recoat time
Substrate Temperature 5°C (41°F) 10°C (50°F) 23°C (73°F) 35°C (95°F) Overcoated By Min Max Min Max Min Max Min Max
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Effective contamination / mould remover
- Can be used for cleaning previously painted surfaces prior to sanding before repainting topside finishes
- And it can be used to prepare inflatable boats for antifouling
- Above-waterline areas
- Bilge/Lockers, Deck - smooth, Exterior cabin/trims, Interior cabin/trims
- Below-waterline areas
- Hull
- Compatible systems
- 1 pack system
- Product type
- Primers
- Manufacturer colours
- (YMA601)
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interlux Fiberglass Surface Prep