Interlux Pre-Kote Plus
Pre-Kote Plus is a one-part Primer and Undercoat, offering substrate protection and an ultra-smooth surface all in one.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
Pre-Kote Plus is a one-part Primer and Undercoat, offering substrate protection and an ultra-smooth surface all in one.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Above-waterline areas | Hull |
|---|---|
| Water types | Brackish Water, Fresh Water, Sea Water |
| Compatible systems | 1 pack system |
| Product type | Undercoats |
| Manufacturer colours | Blue Gray (YUC001), White (YUC000) |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Interlux Pre-Kote Plus
Pre-Kote Plus · TDS
Read the full product requirements, application instructions and limitations.
SDS · PRE-KOTE PLUS BLUE GRAY (Canada, English)
Product safety and handling information.
SDS · PRE-KOTE PLUS WHITE (Canada, English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Pre-Kote Plus is a one-part Primer and Undercoat, offering substrate protection and an ultra-smooth surface all in one.
For use above the waterline with Interlux one-pack finishes and deck paints, Pre-Kote Plus can be applied directly to most substrates, including properly prepared metal. It has lower VOCs, is easier to apply, and has improved flow and aesthetics compared to primers or undercoats alone, making painting easier for DIY customers while providing the perfect foundation for your topcoat.
Recommended uses
Marine undercoats
- Coverage
(Theoretical) 428 ft²/gal per coat. (Practical) 440 ft²/gal per coat.
- Drying time
41°F (5°C) 59°F (15°C) 77°F (25°C) 95°F (35°C) Touch Dry [ISO] 6 hrs 3 hrs 2 hrs 60 mins Hard Dry [ISO] 12 hrs 5 hrs 3 hrs 2.5 hrs Sandable 36 hrs 18 hrs 12 hrs 8 hrs
- Recoat time
Substrate Temperature 41°F (5°C) 59°F (15°C) 77°F (25°C) 95°F (35°C) Overcoated By Min Max Min Max Min Max Min Max Bilgekote 30 hrs 1 mths 18 hrs 14 days 6 hrs 7 days 3 hrs 5 days Interdeck 30 hrs 1 mths 18 hrs 14 days 6 hrs 7 days 3 hrs 5 days PreKote Plus 24 hrs 1 mths 16 hrs 14 days 6 hrs 7 days 3 hrs 5 days Toplac Plus 30 hrs 1 mths 18 hrs 14 days 6 hrs 7 days 3 hrs 5 days Watertite 30 hrs 1 mths 18 hrs 14 days 6 hrs 7 days 3 hrs 5 days Note: Values are without sanding between coats. If maximum overcoating time is exceeded, abrade using 220320 grade wet or dry paper. Remove dust with a dust wipe.
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Reduced working time with greater substrate protection
- Easy to apply by brush and roller with an extra smooth finish
- Excellent flow, leveling, and easy to sand
- Above-waterline areas
- Hull
- Water types
- Brackish Water, Fresh Water, Sea Water
- Compatible systems
- 1 pack system
- Product type
- Undercoats
- Manufacturer colours
- Blue Gray (YUC001), White (YUC000)
Colours &
finish options.
Start with a few colour references, then explore the full collection.
Interlux
Pre-Kote Plus
Screen colours are approximate. These are collection references; colour and tint-base availability can vary by product. Confirm the colour and finish with our team and a physical sample.
Complete your project.
Companion products for the selected product and system.
Interlux Toplac Plus
Finish the specified one-part above-waterline coating system.
Choose the colour for your project and follow the primer and topcoat coating schedule. Not for permanent immersion.
Interlux Brushing Liquid 333
A listed brushing-liquid option for the primer.
Thinning is normally unnecessary. Use only within the current primer instructions; extra film build may be needed when thinned.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interlux Pre-Kote Plus