SPI EURO CLEAR -GAL
Euro Clear is a clearcoat from Southern Polyurethanes for a specified automotive refinishing system.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
Euro Clear is a clearcoat from Southern Polyurethanes for a specified automotive refinishing system.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Manufacturer | Southern Polyurethanes |
|---|---|
| Product name | SPI EURO CLEAR -GAL |
| Inventory description | SPI EURO CLEAR -GAL |
| Unit / package | Gallon |
| Product number | 5100-1 |
| Manufacturer product number | 5100-1 |
Full product details, applications & manufacturer specifications
Euro Clear is a clearcoat from Southern Polyurethanes for a specified automotive refinishing system.
About this product range
SPI Euro Clear 2020 2.1 VOC uses a 4:1 clear-to-activator mix. The manufacturer recommends a 1.3–1.5 mm gun tip. Flash time is 10 minutes for a two-coat application; allow 30 minutes between coats if applying more than two. Its low-temperature baking schedule is 10–15 minutes at 110–120°F, depending on temperature and activator. Do not bake above 120°F. Repair and buffing times depend on the basecoat, activator and curing conditions.
Selected product & format
- Manufacturer product name
- SPI EURO CLEAR -GAL
- Manufacturer product number
- 5100-1
- Selling unit
- Gallon
- Manufacturer
- Southern Polyurethanes
- Product name
- SPI EURO CLEAR -GAL
- Inventory description
- SPI EURO CLEAR -GAL
- Unit / package
- Gallon
- Product number
- 5100-1
- Manufacturer product number
- 5100-1
Complete your project.
Companion products for the selected product and system.
SPI POLAR ACCELERATOR – QT
An optional accelerator where the SPI coating schedule permits it.
For experienced refinishers. Use only the product-specific dose; it significantly shortens pot life. Do not use in epoxy or assume every SPI coating accepts it.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about SPI EURO CLEAR -GAL