SICO ProLuxe Maintenance RE Wood Finish
A clear satin maintenance coat for compatible, previously finished exterior wood siding and logs.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A clear satin maintenance coat for compatible, previously finished exterior wood siding and logs.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product codes | SIK61003C |
|---|---|
| Finish options | Satin; Satiné |
| Bases | Clear finish |
| Available sizes | Gallon/3.78 L (01) |
| Product type | Maintenance RE Wood Finish |
| Finish | Clear satin; non-pigmented; do not tint |
| Recommended uses | Maintenance of exterior vertical wood previously finished with 23 Top Coat RE or Log & Siding, in sound condition. |
| Coating system | 1 maintenance coat |
| Coverage | 400–500 sq ft per 3.78 L on properly prepared compatible surfaces, per coat. |
| Drying time | Touch dry: 6 hours; hard dry: 24–48 hours; rain/dew resistance: 48 hours; full cure: 7 days at 21°C. |
| Recoat time | Single maintenance coat; follow the technical sheet for future maintenance. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
SICO ProLuxe Maintenance RE Wood Finish
TDS – Satin – Clear finish – SIK61003C
Codes: SIK61003C
Read the full product requirements, application instructions and limitations.
SatinClear finish
SIK61003C
Codes: SIK61003C
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A clear satin maintenance coat for compatible, previously finished exterior wood siding and logs.
Use only over a sound, maintained ProLuxe 23 Top Coat RE or Log & Siding finish. Its non-pigmented formula refreshes the protective surface without adding stain colour. It is not for bare wood, decks, doors or outdoor furniture, and must not be applied directly over Primary Coat RE, SRD RE, Door & Window or Premium Deck finishes.
Recommended uses
Maintenance of exterior vertical wood previously finished with 23 Top Coat RE or Log & Siding, in sound condition.
Exterior wood finishes- Finish
Clear satin; non-pigmented; do not tint
- Coverage
400–500 sq ft per 3.78 L on properly prepared compatible surfaces, per coat.
- Application method
Brush in the direction of the grain; immediately back-brush any roller or spray application as directed in the technical sheet.
- Drying time
Touch dry: 6 hours; hard dry: 24–48 hours; rain/dew resistance: 48 hours; full cure: 7 days at 21°C.
- Recoat time
Single maintenance coat; follow the technical sheet for future maintenance.
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product codes
- SIK61003C
- Finish options
- Satin; Satiné
- Bases
- Clear finish
- Available sizes
- Gallon/3.78 L (01)
- Product type
- Maintenance RE Wood Finish
- Finish
- Clear satin; non-pigmented; do not tint
- Recommended uses
- Maintenance of exterior vertical wood previously finished with 23 Top Coat RE or Log & Siding, in sound condition.
- Coating system
- 1 maintenance coat
- Coverage
- 400–500 sq ft per 3.78 L on properly prepared compatible surfaces, per coat.
- Drying time
- Touch dry: 6 hours; hard dry: 24–48 hours; rain/dew resistance: 48 hours; full cure: 7 days at 21°C.
- Recoat time
- Single maintenance coat; follow the technical sheet for future maintenance.
Colours &
finish options.
Explore the published colour and finish information for this product.
- Finish
- Clear satin; non-pigmented; do not tint
Complete your project.
Companion products for the selected product and system.
Pure China Bristle CUB (Economy) Flat Brush · CUB BRISTLE BRUSH – 50MM (2″)
A natural-bristle brush for the specified application method.
Use only for the natural-bristle brush method permitted by this product technical sheet. Choose the brush width for the work. Apply with the grain and back-brush only as directed by that wood finish’s instructions.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about SICO ProLuxe Maintenance RE Wood Finish