PPG SEAL GRIP® GRIPPER® Interior/Exterior 100% Acrylic Latex Primer
Our premium interior/exterior 100% acrylic primer is formulated to meet the performance requirements of the residential and commercial segments.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
Our premium interior/exterior 100% acrylic primer is formulated to meet the performance requirements of the residential and commercial segments.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Sizes | Gallon, 5 Gallon, Quart |
|---|---|
| Sheens | Flat |
| Chemistry | Acrylic |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
PPG SEAL GRIP® GRIPPER® Interior/Exterior 100% Acrylic Latex Primer
TDS – Flat – Multiple bases – 17-921XIC + 1 codes
Bases: Ready mix white; Deeptone base · Codes: 17-921XIC/01, 17-921XIC/05, 17-922XIC/01
Read the full product requirements, application instructions and limitations.
FlatMultiple bases
17-921XI + 3 codes
Bases: Deeptone base; Ready mix white · Codes: 17-921XI/01, 17-921XI/04, 17-921XI/05, 17-921XIC/01, 17-921XIC/05, 17-922XI/01, 17-922XI/05, 17-922XIC/01
Read the full product requirements, application instructions and limitations.
Multiple bases17-941NF
U.S. reference
Codes: 17-941NF/04
Read the full product requirements, application instructions and limitations.
Multiple bases17-921
U.S. reference
Codes: 17-921/01, 17-921/04, 17-921/05
Read the full product requirements, application instructions and limitations.
FlatDeeptone base
17-922XI
Codes: 17-922XI/01, 17-922XI/05
Product safety and handling information.
SDS – Multiple bases – 17-921
Codes: 17-921/01, 17-921/05
Product safety and handling information.
FlatReady mix white
17-921XI
Codes: 17-921XI/01, 17-921XI/04, 17-921XI/05
Product safety and handling information.
FlatReady mix white
17-921XIC
Codes: 17-921XIC/01, 17-921XIC/05
Product safety and handling information.
FlatDeeptone base
17-922XIC
Codes: 17-922XIC/01
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Our premium interior/exterior 100% acrylic primer is formulated to meet the performance requirements of the residential and commercial segments.
Seal Grip Gripper Primer is especially formulated to block most stains, including water, smoke, ink, markers, and tannin. Seal Grip Gripper Primer has exceptional adhesion to glossy surfaces. Also recommended as a whole house primer for use on properly prepared interior or exterior wood, masonry, plaster, wallboard, cement, brick, stucco, cement composition board, aluminum and wall coverings.
Recommended uses
Wood & cabinetry, Commercial, Concrete & masonry, Metal, Exterior surfaces.
Interior walls & ceilings Priming & sealing- Finish
Flat
- Coverage
Approximately 400 sq. ft. (37 sq. meters) per U.S. Gallon (3.78L) on smooth, nonporous surfaces.
- Application method
Apply with a high-quality brush, roller (nap size - 3/8" for smooth surfaces and up to 3/4" for rough or textured surfaces), paint pad, or by spray equipment. Severe stains may require two coats of primer. Brushing is the preferred method of application over chalky sub- strates. If painting will be interrupted for more than 15 minutes, keep brushes and rollers wet by wrapping them in tinfoil or plastic wrap.
- Drying time
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity. To Touch: 30 minutes To Full Cure: 30 days
- Recoat time
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity. To Recoat: 1-2 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Manufacturer identifies a low-VOC formulation.
- Sizes
- Gallon, 5 Gallon, Quart
- Sheens
- Flat
- Chemistry
- Acrylic
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheens
- Flat
Complete your project.
Companion products for the selected product and system.
Bennett MP-X 2.5-inch Angular Sash Brush
Cut in edges and paint trim with an angled synthetic brush.
Choose the brush size for the work and follow the paint’s application directions.
Micro Pro®
An applicator option for rolling larger painted surfaces.
Choose the roller width and nap for your surface and the paint’s application directions.
Bennett Cotton Canvas Drop Cloth · 3 × 20 ft
Protect the work area while painting walls, ceilings or trim.
Choose enough drop cloths to cover the area around your project.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about PPG SEAL GRIP® GRIPPER® Interior/Exterior 100% Acrylic Latex Primer