PERMA-CRETE® PITT-FLEX® Elastomeric Topcoat
PERMA-CRETE PITT-FLEX Elastomeric Coating is specifically designed for above grade, masonry substrates that need both flexibility and durability.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
PERMA-CRETE PITT-FLEX Elastomeric Coating is specifically designed for above grade, masonry substrates that need both flexibility and durability.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Sizes | Gallon, 5 Gallon |
|---|---|
| Sheens | Flat |
| Chemistry | Acrylic |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
PERMA-CRETE® PITT-FLEX® Elastomeric Topcoat
TDS – Flat – Multiple bases – 4-110XIC + 1 codes
Bases: Neutral/Ultradeep/Accent/Clear; White & pastel base · Codes: 4-110XIC/01, 4-110XIC/05, 4-140XIC/01, 4-140XIC/05
Read the full product requirements, application instructions and limitations.
FlatMultiple bases
4-110XI + 3 codes
Bases: Neutral/Ultradeep/Accent/Clear; White & pastel base · Codes: 4-110XI/01, 4-110XI/05, 4-110XIC/01, 4-110XIC/05, 4-140XI/05, 4-140XIC/01, 4-140XIC/05
Read the full product requirements, application instructions and limitations.
FlatNeutral/Ultradeep/Accent/Clear
4-140XIC
Codes: 4-140XIC/01, 4-140XIC/05
Product safety and handling information.
FlatWhite & pastel base
4-110XI
Codes: 4-110XI/01
Product safety and handling information.
FlatWhite & pastel base
4-110XI
Codes: 4-110XI/05
Product safety and handling information.
FlatNeutral/Ultradeep/Accent/Clear
4-140XI
Codes: 4-140XI/05
Product safety and handling information.
FlatWhite & pastel base
4-110XIC
Codes: 4-110XIC/05
Product safety and handling information.
FlatWhite & pastel base
4-110XIC
Codes: 4-110XIC/01
Product safety and handling information.
FlatReady mix white
UC94080
Codes: UC94080/05
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
PERMA-CRETE PITT-FLEX Elastomeric Coating is specifically designed for above grade, masonry substrates that need both flexibility and durability.
Its formula offers dirt resistance, alkali resistance for applications on fresh concrete of at least 7 days old and with a pH of less than 13 and application down to 2°C. Its 100% acrylic high build formula bridges cracks and masks surface imperfections. PITT-FLEX Elastomeric Coating protects against wind-driven rain. PERMA-CRETE elastomeric is ideal for use on a variety of exterior masonry projects including high-rise apartments and condominiums warehouses, hospitals, schools, hotels and commercial and residential structures.
Recommended uses
Commercial, Concrete & masonry, Exterior surfaces.
- Finish
Flat
- Coverage
Approximately 80 to 110 sq. ft. (7 to 10 sq. meters) per U.S. gallon (3.78 L) on block walls and up to 125 sq. ft. (12 sq. meters) on smooth masonry.
- Application method
Apply with a high quality synthetic brush, roller, paint pad, or by spray equipment. Maintain a wet edge for sheen uniformity. Brush: High quality polyester/nylon brush. Apply by brush to small areas only. Roller: 20 - 25 mm (3/4 - 1 in.) nap synthetic roller cover. When applying by roller, the final passes should be completed in a downward direction to ensure a uniform appearance. Airless Spray: Minimum requirements: Pressure 2000 - 2800 psi, tip 0.019 in. - 0.027 in., flow rate 5.7 L/minute. Always back roll the surface when applied by spray to achieve a pinhole free film.
- Drying time
DRYING TIME: Dry time @ 25°C (77°F); 50% relative humidity. To Touch: 1 hour
- Recoat time
DRYING TIME: Dry time @ 25°C (77°F); 50% relative humidity. To Recoat: 24 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Manufacturer identifies a low-VOC formulation.
- Sizes
- Gallon, 5 Gallon
- Sheens
- Flat
- Chemistry
- Acrylic
Colours &
finish options.
Start with a few colour references, then explore the full collection.
PPG
PPG Paint Colours
Delicate White · PPG1001-1
Peacock Green · PPG1140-7
Field Poppy · PPG1195-7
Violets Are Blue · PPG1246-6
Green Pear · PPG1224-7
Canary Yellow · PPG1215-4
Burgundy Wine · PPG1053-7
Aloha · PPG1229-5- Sheens
- Flat
Screen colours are approximate. These are collection references; colour and tint-base availability can vary by product. Confirm the colour and finish with our team and a physical sample.
Complete your project.
Companion products for the selected product and system.
Bennett MP-X 2.5-inch Angular Sash Brush
A synthetic brush for the specified application method.
For the brush application method listed in the coating technical sheet. Prepare the surface and apply at the required spread rate; choose a brush size suitable for the area. Brush application is limited to small areas; use the specified roller method for larger areas.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about PERMA-CRETE® PITT-FLEX® Elastomeric Topcoat