Enviroline 124
A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Lining-Epoxy Novolac |
|---|---|
| Product Chemistry | Epoxy Novolac |
| Volume Solids | 100 |
| VOC content (EPA method) | 10 g/lt |
| Colour Options | Green |
| Maximum Dry film thickness | 3000 |
| Minimum Dry film thickness | 1000 |
| Number of components | Multi Pack |
| Attributes | Solvent Free |
| Chemistry | Epoxy |
| Components | Two-component |
| Mixing ratio | 2 part(s) : 1 part(s) by volume |
| Pot life | 77°F (25°C) 104°F (40°C) 10 minutes 6 minutes |
| Film thickness | 40-120 mils (1000-3000 microns) dry equivalent to 40-120 mils (1000-3000 microns) wet |
| VOC | 10 g/lt EPA Method 24 |
| Cleanup | Clean all equipment that has been in contact with mixed Enviroline 124 immediately after. |
| Thinning | Not recommended details. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Enviroline
124
TDS · Enviroline 124 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · ENVIROLINE 124 PART B (en_CA)
Product safety and handling information.
MSDS · ENVIROLINE 124 PART B FAST (en_CA)
Product safety and handling information.
MSDS · ENVIROLINE 124 Part A (en_US)
Product safety and handling information.
MSDS · Environline 124 Part B (en_US)
Product safety and handling information.
MSDS · ENVIROLINE 124 PART B (en_US)
Product safety and handling information.
MSDS · ENVIROLINE 124 PART B FAST (en_US)
Product safety and handling information.
Application guidelines · Enviroline 124 Application Guidelines (English · global)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
Recommended uses
Industrial.
Industrial coating- Finish
Not applicable
- Coverage
0.50 m2/litre at 2000 microns and stated volume solids 3.81 sq.ft/US quart at 80 mils d.f.t. and stated volume solids Allow appropriate loss factors
- Application method
Brush, Cartridge Gun, Knife,
- Drying time
50°F (10°C): Touch dry 105 minutes; hard/handle dry 8 hours¹ 77°F (25°C): Touch dry 75 minutes; hard/handle dry 3 hours¹ 104°F (40°C): Touch dry 25 minutes; hard/handle dry 45 minutes¹
- Recoat time
50°F (10°C): Minimum 105 minutes; maximum 24 hours 77°F (25°C): Minimum 75 minutes; maximum 24 hours 104°F (40°C): Minimum 25 minutes; maximum 45 minutes
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Requires a two-component mixture.
- Product type
- Lining-Epoxy Novolac
- Product Chemistry
- Epoxy Novolac
- Volume Solids
- 100
- VOC content (EPA method)
- 10 g/lt
- Colour Options
- Green
- Maximum Dry film thickness
- 3000
- Minimum Dry film thickness
- 1000
- Number of components
- Multi Pack
- Attributes
- Solvent Free
- Chemistry
- Epoxy
- Components
- Two-component
- Mixing ratio
- 2 part(s) : 1 part(s) by volume
- Pot life
- 77°F (25°C) 104°F (40°C) 10 minutes 6 minutes
- Film thickness
- 40-120 mils (1000-3000 microns) dry equivalent to 40-120 mils (1000-3000 microns) wet
- VOC
- 10 g/lt EPA Method 24
- Cleanup
- Clean all equipment that has been in contact with mixed Enviroline 124 immediately after.
- Thinning
- Not recommended details.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Enviroline 124