Interzinc 22
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Inorganic Zinc Rich Silicate |
|---|---|
| Product Chemistry | Inorganic Zinc Rich Silicate |
| Volume Solids | 63 |
| VOC content (EPA method) | 470 g/lt |
| Colour Options | Green,Grey |
| Maximum Dry film thickness | 75 |
| Minimum Dry film thickness | 50 |
| Number of components | Multi Pack |
| Mixing ratio | 3.1 part(s) : 1 part(s) by volume Mix ratio is given for advice; always mix the product in the proportions supplied. |
| Pot life | 41°F (5°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 12 hours 8 hours 4 hours 2 hours |
| Film thickness | 2-3 mils (50-75 microns) dry equivalent to 3.2-4.8 mils (79-119 microns) wet |
| VOC | 3.92 lb/gal (470 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA803/International GTA415/International GTA138. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA803, As regionally available. Do not thin more than allowed by local International GTA415 or environmental legislation International GTA138 |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Interzinc 22
TDS · Interzinc 22 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERZINC 22 GREEN GREY PART A (en_CA)
Product safety and handling information.
MSDS · INTERZINC 22 GREEN GREY PART A (en_US)
Product safety and handling information.
Application guidelines · Interzinc 22 Application Guidelines (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Power Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · OEM Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Infrastructure Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Downstream Oil and Gas Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Stadia Track Records (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Upstream Oil & Gas Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Brochures · Interzinc 22 Series Brochure (en_US)
Read the manufacturer’s instructions and product information.
Proof of Performance · J&G OEM (en_US)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments.
Rapid recoat technology allows faster throughput of coated steel, greatly enhancing productivity. Interzinc 22 conforms to SSPC Paint 20 Level 1 and ASTM D20 D520 Type II and can also be used as a tank lining for the carriage of different chemical cargoes.
Recommended uses
Exterior decks, Industrial, Commercial, Metal.
Industrial coating Priming & sealing- Finish
Matte
- Coverage
337 sq.ft/US gallon at 3 mils d.f.t and stated volume solids 8.40 m²/litre at 75 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Air Spray
- Drying time
41°F (5°C): Touch dry 30 minutes; hard/handle dry 3 hours 59°F (15°C): Touch dry 20 minutes; hard/handle dry 90 minutes 77°F (25°C): Touch dry 10 minutes; hard/handle dry 1 hour 104°F (40°C): Touch dry 5 minutes; hard/handle dry 30 minutes
- Recoat time
41°F (5°C): Minimum 18 hours; maximum Extended¹ 59°F (15°C): Minimum 9 hours; maximum Extended¹ 77°F (25°C): Minimum 4.5 hours; maximum Extended¹ 104°F (40°C): Minimum 1.5 hours; maximum Extended¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Primer-Inorganic Zinc Rich Silicate
- Product Chemistry
- Inorganic Zinc Rich Silicate
- Volume Solids
- 63
- VOC content (EPA method)
- 470 g/lt
- Colour Options
- Green,Grey
- Maximum Dry film thickness
- 75
- Minimum Dry film thickness
- 50
- Number of components
- Multi Pack
- Mixing ratio
- 3.1 part(s) : 1 part(s) by volume Mix ratio is given for advice; always mix the product in the proportions supplied.
- Pot life
- 41°F (5°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 12 hours 8 hours 4 hours 2 hours
- Film thickness
- 2-3 mils (50-75 microns) dry equivalent to 3.2-4.8 mils (79-119 microns) wet
- VOC
- 3.92 lb/gal (470 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA803/International GTA415/International GTA138. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA803, As regionally available. Do not thin more than allowed by local International GTA415 or environmental legislation International GTA138
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interzinc 22