Intergard 251
The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Epoxy |
|---|---|
| Product Chemistry | Epoxy |
| Volume Solids | 63 |
| VOC content (EPA method) | 390 g/lt |
| Colour Options | Buff,Grey,Red Oxide |
| Maximum Dry film thickness | 75 |
| Minimum Dry film thickness | 50 |
| Number of components | Multi Pack |
| Chemistry | Epoxy |
| Components | Two-component |
| Mixing ratio | 4 part(s) : 1 part(s) by volume |
| Pot life | 50°F (10°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 10 hours 8 hours 6 hours 3 hours |
| Film thickness | 2-3 mils (50-75 microns) dry equivalent to 3.2-4.8 mils (79-119 microns) wet |
| VOC | 3.25 lb/gal (390 g/lt) EPA Method 24 293 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC) |
| Cleanup | Clean all equipment immediately after use with International GTA822. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA220 Do not thin more than allowed by local environmental (or International GTA415) legislation |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Intergard
251
TDS · Intergard 251 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERGARD 251 PART B (en_CA)
Product safety and handling information.
MSDS · INTERGARD 251 GREY PART A (en_CA)
Product safety and handling information.
MSDS · Intergard 251 White Part A (en_CA)
Product safety and handling information.
MSDS · INTERGARD 251 PART B (en_US)
Product safety and handling information.
MSDS · INTERGARD 251 GREY PART A (en_US)
Product safety and handling information.
MSDS · Intergard 251 White Part A (en_US)
Product safety and handling information.
Proof of Performance · Power Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · OEM Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Bridges Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Infrastructure Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Downstream Oil and Gas Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Stadia Track Records (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Upstream Oil & Gas Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Mining and Minerals Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Washington University School of Medicine (en_US)
Read the manufacturer’s instructions and product information.
Proof of Performance · Marathon Alba Living Quarters (en_US)
Read the manufacturer’s instructions and product information.
Proof of Performance · Noble Max Smith (en_US)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site.
Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
Recommended uses
Industrial, Commercial.
Industrial coating Priming & sealing- Finish
Matte
- Coverage
337 sq.ft/US gallon at 3 mils d.f.t and stated volume solids 8.40 m²/litre at 75 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Air Spray, Airless Spray, Brush, Roller
- Drying time
50°F (10°C): Touch dry 2 hours; hard/handle dry 7 hours 59°F (15°C): Touch dry 1 hour; hard/handle dry 5 hours 77°F (25°C): Touch dry 45 minutes; hard/handle dry 3 hours 104°F (40°C): Touch dry 30 minutes; hard/handle dry 2 hours
- Recoat time
50°F (10°C): Minimum 7 hours; maximum 12 months¹ 59°F (15°C): Minimum 5 hours; maximum 12 months¹ 77°F (25°C): Minimum 3 hours; maximum 12 months¹ 104°F (40°C): Minimum 2 hours; maximum 12 months¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Requires a two-component mixture.
- Product type
- Primer-Epoxy
- Product Chemistry
- Epoxy
- Volume Solids
- 63
- VOC content (EPA method)
- 390 g/lt
- Colour Options
- Buff,Grey,Red Oxide
- Maximum Dry film thickness
- 75
- Minimum Dry film thickness
- 50
- Number of components
- Multi Pack
- Chemistry
- Epoxy
- Components
- Two-component
- Mixing ratio
- 4 part(s) : 1 part(s) by volume
- Pot life
- 50°F (10°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 10 hours 8 hours 6 hours 3 hours
- Film thickness
- 2-3 mils (50-75 microns) dry equivalent to 3.2-4.8 mils (79-119 microns) wet
- VOC
- 3.25 lb/gal (390 g/lt) EPA Method 24 293 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC)
- Cleanup
- Clean all equipment immediately after use with International GTA822. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA220 Do not thin more than allowed by local environmental (or International GTA415) legislation
Complete your project.
Companion products for the selected product and system.
Interthane 990
An optional polyurethane finish for a specified protective system.
For atmospheric service. Confirm regional products, preparation, recoat intervals and the complete system with our team.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Intergard 251