Interprime 234
A one component, high build alkyd primer containing anticorrosive pigment. For use as a general purpose maintenance primer primarily for the bridge market, for application to correctly prepared steel.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A one component, high build alkyd primer containing anticorrosive pigment. For use as a general purpose maintenance primer primarily for the bridge market, for application to correctly prepared steel.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Alkyd |
|---|---|
| Product Chemistry | Alkyd |
| Volume Solids | 58 |
| VOC content (EPA method) | 340 g/lt |
| Colour Options | Grey,Off white,Red |
| Maximum Dry film thickness | 89 |
| Minimum Dry film thickness | 38 |
| Number of components | Single Pack |
| Chemistry | Alkyd |
| Components | Single-component |
| Film thickness | 1.5-3.6 mils (38-89 microns) dry equivalent to 2.6-6.1 mils (66-153 microns) wet |
| VOC | 2.83 lb/gal (340 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with GTA004. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA004 Not normally required. Do not thin more than allowed by local environmental legislation |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interprime
234
TDS · Interprime 234 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERPRIME 234 RED (en_CA)
Product safety and handling information.
MSDS · INTERPRIME 234 OFF WHITE (en_CA)
Product safety and handling information.
MSDS · INTERPRIME 234 FS26293 GREY (en_CA)
Product safety and handling information.
MSDS · INTERPRIME 234 RED (en_US)
Product safety and handling information.
MSDS · INTERPRIME 234 OFF WHITE (en_US)
Product safety and handling information.
MSDS · INTERPRIME 234 FS26293 GREY (en_US)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A one component, high build alkyd primer containing anticorrosive pigment. For use as a general purpose maintenance primer primarily for the bridge market, for application to correctly prepared steel.
Recommended uses
Exterior decks, Industrial.
Industrial coating Priming & sealing- Finish
Matte
- Coverage
465 sq.ft/US gallon at 2 mils d.f.t and stated volume solids 11.60 m²/litre at 50 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Roller, Brush, Conventional Spray
- Drying time
41°F (5°C): Touch dry 2 hours; hard/handle dry 16 hours 50°F (10°C): Touch dry 2 hours; hard/handle dry 12 hours 77°F (25°C): Touch dry 90 minutes; hard/handle dry 6 hours 95°F (35°C): Touch dry 30 minutes; hard/handle dry 5 hours
- Recoat time
41°F (5°C): Minimum 20 hours; maximum Extended¹ 50°F (10°C): Minimum 12 hours; maximum Extended¹ 77°F (25°C): Minimum 6 hours; maximum Extended¹ 95°F (35°C): Minimum 5 hours; maximum Extended¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Primer-Alkyd
- Product Chemistry
- Alkyd
- Volume Solids
- 58
- VOC content (EPA method)
- 340 g/lt
- Colour Options
- Grey,Off white,Red
- Maximum Dry film thickness
- 89
- Minimum Dry film thickness
- 38
- Number of components
- Single Pack
- Chemistry
- Alkyd
- Components
- Single-component
- Film thickness
- 1.5-3.6 mils (38-89 microns) dry equivalent to 2.6-6.1 mils (66-153 microns) wet
- VOC
- 2.83 lb/gal (340 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with GTA004. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA004 Not normally required. Do not thin more than allowed by local environmental legislation
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interprime 234