Cathacoat 302H
A high performance, two component, reinforced inorganic zinc-rich primer.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A high performance, two component, reinforced inorganic zinc-rich primer.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Reinforced Inorganic Zinc |
|---|---|
| Product Chemistry | Reinforced Inorganic Zinc |
| Volume Solids | 78 |
| VOC content (EPA method) | 282 g/lt |
| Colour Options | Green |
| Maximum Dry film thickness | 100 |
| Minimum Dry film thickness | 62.5 |
| Number of components | Multi Pack |
| Components | Two-component |
| Mixing ratio | 9 part(s) : 1 part(s) by volume |
| Pot life | 5°C (41°F) 15°C (59°F) 25°C (77°F) 10 hours 9 hours 8 hours |
| Film thickness | 62.50-100 microns (2.5-4 mils) dry equivalent to 81-128 microns (3.2-5.1 mils) wet |
| VOC | 2.35 lb/gal (282 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA610. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. All surplus material and empty containers should be disposed of in accordance with appropriate regional regulations/legislation. |
| Thinning | International GTA610. See Product Characteristics section for further details |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Cathacoat
302H
TDS · Cathacoat 302H (en_US)
Read the full product requirements, application instructions and limitations.
SDS · Cathacoat 302H · Primer Green Part A (Canada, English, 2019)
Product safety and handling information.
SDS · Cathacoat 302H · 302H/302V Clear Part B (Canada, English, 2015)
Product safety and handling information.
Brochures · Cathacoat 302 Series Brochure (en_US)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A high performance, two component, reinforced inorganic zinc-rich primer.
Ideal for cathodic protection of steel structures, tanks, equipment, piping and other steel surfaces exposed in mild to severe industrial environments. Also ideal for touch-up and maintenance work because of its easy application, wide compatibility and fast dry-to-recoat. Formulated to minimise topcoat bubbling typically experienced with inorganic zinc rich primers.
Recommended uses
Industrial, Commercial.
Industrial coating Priming & sealing- Finish
Matte
- Coverage
386 sq.ft/US gallon at 3.2 mils d.f.t and stated volume solids 9.63 m²/litre at 81 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Roller, Air Spray, Brush
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Requires a two-component mixture.
- Product type
- Primer-Reinforced Inorganic Zinc
- Product Chemistry
- Reinforced Inorganic Zinc
- Volume Solids
- 78
- VOC content (EPA method)
- 282 g/lt
- Colour Options
- Green
- Maximum Dry film thickness
- 100
- Minimum Dry film thickness
- 62.5
- Number of components
- Multi Pack
- Components
- Two-component
- Mixing ratio
- 9 part(s) : 1 part(s) by volume
- Pot life
- 5°C (41°F) 15°C (59°F) 25°C (77°F) 10 hours 9 hours 8 hours
- Film thickness
- 62.50-100 microns (2.5-4 mils) dry equivalent to 81-128 microns (3.2-5.1 mils) wet
- VOC
- 2.35 lb/gal (282 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA610. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. All surplus material and empty containers should be disposed of in accordance with appropriate regional regulations/legislation.
- Thinning
- International GTA610. See Product Characteristics section for further details
Complete your project.
Companion products for the selected product and system.
Bar-Rust 235
A listed epoxy coating for the protective system.
Use only in a specified compatible system. Confirm preparation, film thickness and recoat intervals.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Cathacoat 302H