Intercure 99NA
Intercure 99NA is a fast-curing polyaspartic primer/finish with high solids and low VOC content. It combines corrosion protection with durable colour and gloss.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
Intercure 99NA is a fast-curing polyaspartic primer/finish with high solids and low VOC content. It combines corrosion protection with durable colour and gloss.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Finish-Direct to Metal Polyaspartic |
|---|---|
| Product Chemistry | Direct to Metal Polyaspartic |
| Volume Solids | 80 |
| VOC content (EPA method) | 195 g/lt |
| Colour Options | Available on Chromascan |
| Maximum Dry film thickness | 250 |
| Minimum Dry film thickness | 150 |
| Number of components | Multi Pack |
| Chemistry | Polyaspartic |
| Mixing ratio | 2 part(s) : 1 part(s) by volume |
| Pot life | 41°F (5°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 2.5 hours 2 hours 75 minutes 60 minutes |
| Film thickness | 6-10 mils (150-250 microns) dry equivalent to 7.5-12.5 mils (188-313 microns) wet |
| VOC | 1.62 lb/gal (195 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA713. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA713 (or Do not thin more than allowed by local environmental International GTA056) legislation. Do not use alternative thinners. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Intercure 99NA
TDS · Intercure 99NA (en_US)
Read the full product requirements, application instructions and limitations.
SDS · Intercure 99NA · SEC Midcon Gray Part A (Canada, English, 2019)
Product safety and handling information.
SDS · Intercure 99NA · White Part A (US, English, 2017)
Product safety and handling information.
SDS · Intercure 99NA · Base Ultra Deep Part A (US, English, 2017)
Product safety and handling information.
SDS · Intercure 99NA · Part B (US, English, 2016)
Product safety and handling information.
Application guidelines · Intercure 99NA Application Guidelines (en_US)
Read the manufacturer’s instructions and product information.
Brochures · Intercure 99NA Brochure (en_US)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Intercure 99NA is a fast-curing polyaspartic primer/finish with high solids and low VOC content. It combines corrosion protection with durable colour and gloss.
Direct-to-metal or approved primed systems
For moderately corrosive environments up to C3 under ISO 12944-2, it can be applied directly to metal in one coat at 150–250 microns (6–10 mils), using standard application equipment. This single-coat approach can reduce application time and labour compared with a two-coat system.
For more aggressive ISO 12944 C4 and C5M environments, it may be specified as a high-build intermediate/finish over approved anti-corrosive primers. Confirm the complete coating specification for the exposure conditions.
Recommended uses
Industrial, Commercial, Metal.
Industrial coating Priming & sealing- Finish
Gloss
- Coverage
183 sq.ft/US gallon at 7 mils d.f.t and stated volume solids 4.60 m²/litre at 175 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Air Spray
- Drying time
41°F (5°C): Touch dry 1.5 hours; hard/handle dry 3 hours¹ 59°F (15°C): Touch dry 45 minutes; hard/handle dry 2.5 hours¹ 77°F (25°C): Touch dry 30 minutes; hard/handle dry 1.5 hours¹ 104°F (40°C): Touch dry 30 minutes; hard/handle dry 1.5 hours¹
- Recoat time
41°F (5°C): Minimum 3 hours; maximum Extended² 59°F (15°C): Minimum 2.5 hours; maximum Extended² 77°F (25°C): Minimum 1.5 hours; maximum Extended² 104°F (40°C): Minimum 1.5 hours; maximum Extended²
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Manufacturer identifies a low-VOC formulation.
- Product type
- Primer-Finish-Direct to Metal Polyaspartic
- Product Chemistry
- Direct to Metal Polyaspartic
- Volume Solids
- 80
- VOC content (EPA method)
- 195 g/lt
- Colour Options
- Available on Chromascan
- Maximum Dry film thickness
- 250
- Minimum Dry film thickness
- 150
- Number of components
- Multi Pack
- Chemistry
- Polyaspartic
- Mixing ratio
- 2 part(s) : 1 part(s) by volume
- Pot life
- 41°F (5°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 2.5 hours 2 hours 75 minutes 60 minutes
- Film thickness
- 6-10 mils (150-250 microns) dry equivalent to 7.5-12.5 mils (188-313 microns) wet
- VOC
- 1.62 lb/gal (195 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA713. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA713 (or Do not thin more than allowed by local environmental International GTA056) legislation. Do not use alternative thinners.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Intercure 99NA