Intercure 4500
A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Finish-Direct to Metal Polyaspartic |
|---|---|
| Product Chemistry | Direct to Metal Polyaspartic |
| Volume Solids | 77 |
| VOC content (EPA method) | 225 g/lt |
| Colour Options | Limited range |
| Maximum Dry film thickness | 250 |
| Minimum Dry film thickness | 150 |
| Number of components | Multi Pack |
| Chemistry | Polyaspartic |
| Mixing ratio | 4 part(s) : 1 part(s) by volume |
| Pot life | 5°C (41°F) 15°C (59°F) 25°C (77°F) 40°C (104°F) 3 hours 2 hours 1 hour 45 minutes |
| Film thickness | 150-250 microns (6-10 mils) dry equivalent to 195-325 microns (7.8-13 mils) wet |
| VOC | 1.87 lb/gal (225 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA713. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA713 Do not thin more than allowed by local (or GTA056) environmental legislation. Do not use alternative thinners. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Intercure
4500
TDS · Intercure 4500 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERCURE 4500 BASE LIGHT PART A (en_CA)
Product safety and handling information.
MSDS · INTERCURE 4500 BASE ULTRA DEEP PART A (en_CA)
Product safety and handling information.
MSDS · INTERCURE 4500 Light Grey Part A (en_CA)
Product safety and handling information.
MSDS · INTERCURE 4500 BLACK PART A (en_CA)
Product safety and handling information.
MSDS · INTERCURE 4500 BASE LIGHT PART A (en_US)
Product safety and handling information.
MSDS · INTERCURE 4500 BASE ULTRA DEEP PART A (en_US)
Product safety and handling information.
MSDS · INTERCURE 4500 Light Grey Part A (en_US)
Product safety and handling information.
MSDS · INTERCURE 4500 WATERFORD 1864WHITE PTA (en_US)
Product safety and handling information.
MSDS · INTERCURE 4500 WATERFORD GB GREEN PT A (en_US)
Product safety and handling information.
MSDS · INTERCURE 4500 BLACK PART A (en_US)
Product safety and handling information.
Application guidelines · 4500 Application Guidelines (English · global)
Read the manufacturer’s instructions and product information.
Brochures · Intercure 4500 Brochure (en_US)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability.
Based upon innovative polyaspartic resin technology, Intercure 4500 can be applied as a single coat direct-to-metal or over suitable primers for more corrosive environments using standard application equipment. Its rapid cure characteristics (even at low temperatures) help to further optimize application time and reduce labour costs.
Recommended uses
Industrial, Metal.
Industrial coating- Finish
Semi-gloss
- Coverage
176 sq.ft/US gallon at 7 mils d.f.t and stated volume solids 4.40 m²/litre at 175 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Air Spray
- Drying time
41°F (5°C): Touch dry 60 minutes; hard/handle dry 3.5 hours¹ 59°F (15°C): Touch dry 45 minutes; hard/handle dry 2.5 hours¹ 77°F (25°C): Touch dry 30 minutes; hard/handle dry 2 hours¹ 104°F (40°C): Touch dry 15 minutes; hard/handle dry 1.5 hours¹
- Recoat time
41°F (5°C): Minimum 3.5 hours; maximum 12 months 59°F (15°C): Minimum 2.5 hours; maximum 12 months 77°F (25°C): Minimum 2 hours; maximum 12 months 104°F (40°C): Minimum 1.5 hours; maximum 12 months
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Manufacturer identifies a low-VOC formulation.
- Product type
- Finish-Direct to Metal Polyaspartic
- Product Chemistry
- Direct to Metal Polyaspartic
- Volume Solids
- 77
- VOC content (EPA method)
- 225 g/lt
- Colour Options
- Limited range
- Maximum Dry film thickness
- 250
- Minimum Dry film thickness
- 150
- Number of components
- Multi Pack
- Chemistry
- Polyaspartic
- Mixing ratio
- 4 part(s) : 1 part(s) by volume
- Pot life
- 5°C (41°F) 15°C (59°F) 25°C (77°F) 40°C (104°F) 3 hours 2 hours 1 hour 45 minutes
- Film thickness
- 150-250 microns (6-10 mils) dry equivalent to 195-325 microns (7.8-13 mils) wet
- VOC
- 1.87 lb/gal (225 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA713. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA713 Do not thin more than allowed by local (or GTA056) environmental legislation. Do not use alternative thinners.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Intercure 4500