Interplate 937
A two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Preconstruction Primer-Inorganic Zinc Silicate |
|---|---|
| Product Chemistry | Inorganic Zinc Silicate |
| Volume Solids | 23 |
| VOC content (EPA method) | 649 g/lt |
| Colour Options | Grey |
| Maximum Dry film thickness | 18 |
| Minimum Dry film thickness | 10 |
| Number of components | Multi Pack |
| Mixing ratio | 0.6 part(s) : 1.0 part(s) by volume |
| Pot life | 5°C (41°F) 10°C (50°F) 25°C (77°F) 40°C (104°F) 24 hours 24 hours 24 hours 6 hours |
| Film thickness | 10-18 microns (0.4-0.7 mils) dry equivalent to 43-78 microns (1.7-3.1 mils) wet |
| VOC | 5.41 lb/gal (649 g/lt) EPA Method 24 519 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC) |
| Cleanup | Clean all equipment immediately after use with International GTA820 or International GTA840. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA820 or International GTA840 |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interplate
937
TDS · Interplate 937 (English · global)
Read the full product requirements, application instructions and limitations.
MSDS · INTERPLATE 937 LIGHT GREEN PART A (en_CA)
Product safety and handling information.
MSDS · INTERPLATE 937 GREY PART A (en_CA)
Product safety and handling information.
MSDS · INTERPLATE 937 BROWN PART A (en_CA)
Product safety and handling information.
MSDS · INTERPLATE 937 PART B (en_CA)
Product safety and handling information.
MSDS · INTERPLATE 937 LIGHT GREEN PART A (en_US)
Product safety and handling information.
MSDS · INTERPLATE 937 GREY PART A (en_US)
Product safety and handling information.
MSDS · INTERPLATE 937 BROWN PART A (en_US)
Product safety and handling information.
MSDS · INTERPLATE 937 PART B (en_US)
Product safety and handling information.
MSDS · INTERPLATE 937 BLUE PART A (en_US)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts.
Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing thereby reducing secondary surface preparation requirements in comparison to typical zinc silicate products.
Recommended uses
Industrial.
Industrial coating Priming & sealing- Finish
Matt
- Coverage
17.70 m²/litre at 13 microns d.f.t and stated volume solids 738 sq.ft/US gallon at 0.5 mils d.f.t and stated volume solids Allow appropriate loss factors.
- Application method
Automatic Airless Spray, Air Spray, Brush, Roller
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Preconstruction Primer-Inorganic Zinc Silicate
- Product Chemistry
- Inorganic Zinc Silicate
- Volume Solids
- 23
- VOC content (EPA method)
- 649 g/lt
- Colour Options
- Grey
- Maximum Dry film thickness
- 18
- Minimum Dry film thickness
- 10
- Number of components
- Multi Pack
- Mixing ratio
- 0.6 part(s) : 1.0 part(s) by volume
- Pot life
- 5°C (41°F) 10°C (50°F) 25°C (77°F) 40°C (104°F) 24 hours 24 hours 24 hours 6 hours
- Film thickness
- 10-18 microns (0.4-0.7 mils) dry equivalent to 43-78 microns (1.7-3.1 mils) wet
- VOC
- 5.41 lb/gal (649 g/lt) EPA Method 24 519 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC)
- Cleanup
- Clean all equipment immediately after use with International GTA820 or International GTA840. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA820 or International GTA840
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interplate 937