CLASSIC ORIGINAL
A low-lustre penetrating finish for exterior log and timber-framed buildings where a natural, non-film-forming appearance is preferred.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A low-lustre penetrating finish for exterior log and timber-framed buildings where a natural, non-film-forming appearance is preferred.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
CLASSIC ORIGINAL
Technical data sheet – CLASSIC ORIGINAL
Read the full product requirements, application instructions and limitations.
Safety data sheet – CLASSIC ORIGINAL
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A low-lustre penetrating finish for exterior log and timber-framed buildings where a natural, non-film-forming appearance is preferred.
Sansin identifies Classic Clear UV as the third finishing application over transparent natural Classic finishes on new and existing exterior wood. Refer to the Classic Original technical and safety sheets for preparation and application requirements.
Recommended uses
Exterior & decks Exterior wood Log homesColours &
finish options.
Explore the published colour and finish information for this product.
CLASSIC ORIGINAL colour references
Choose the formula and coating schedule for the wood, exposure and opacity. A physical sample and the correct tint base are required. Topcoat colours must suit the underlying finish.
DRIFTWOOD 03Exterior Natural
CHAMPAGNE 1110Exterior Natural
LIGHT OAK 29Exterior Translucent
BLACK BIRD 2037Exterior Translucent
PRARIE 2057Exterior Translucent
GARNET 60Exterior Saturated
BURNT OCHRE 105Exterior Saturated
WHISTLEDOWN 2085Exterior Saturated
Screen colours are approximate. Confirm your choice with a physical sample. Wood species, fabric opacity, preparation and the coating system can affect the result.
Complete your project.
Companion products for the selected product and system.
MULTI-WASH
Clean an existing finished wood surface before a maintenance coat.
For maintenance cleaning, use the label dilution, test first and rinse thoroughly. Let the surface dry before coating; cleaning does not replace stripping or sanding when needed.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about CLASSIC ORIGINAL