Module edge router MFK 700 EQ-Set
With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product number | 576239 |
|---|---|
| No-load speed | 10 000 - 26 000 RPM |
| Routing depth fine adjustment range | 1/2" (14 mm) |
| Max. bit diameter | 1" (26 mm) |
| Dust extraction connection dia. | 1-1/16" (27 mm) |
| Weight | 5.07 lbs (2.3 kg) |
| Drive type | 120 VAC |
| Collet dia. | 1/4" - 5/16" (6 - 8 mm) |
| Cable length | 13.123 ft (4 m) |
| Power consumption | 720 watt |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Op. Instruct.
Read the manufacturer’s instructions and product information.
Label
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps.
Trim laminate and edge band or rout grooves for inlays easily with the light weight and manoeuvrable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256″ (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks.
Due to the nature of the horizontal base design, there is a limit to the bit size for use in this configuration. Do not use a bit with a cutting length greater than 5/8″ (16 mm) and a shank length of 1-13/16″ (46 mm). For greatest range of adjustment a 3/4″ (19 mm) bit diameter is recommended. Recommended Festool bits – 491 666 and 491 670 for trimming of edge banding with horizontal base.
Recommended uses
Tools & equipment.
- Product number
- 576239
- No-load speed
- 10 000 - 26 000 RPM
- Routing depth fine adjustment range
- 1/2" (14 mm)
- Max. bit diameter
- 1" (26 mm)
- Dust extraction connection dia.
- 1-1/16" (27 mm)
- Weight
- 5.07 lbs (2.3 kg)
- Drive type
- 120 VAC
- Collet dia.
- 1/4" - 5/16" (6 - 8 mm)
- Cable length
- 13.123 ft (4 m)
- Power consumption
- 720 watt
Complete your project.
Companion products for the selected product and system.
Radius Router Bit S8 HW R3 D28 KL12,7 MFK
Add the matching roundover bit for edging work.
8 mm shank requires the matching 8 mm collet; set cutting depth for the desired edge radius.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Module edge router MFK 700 EQ-Set