WOODFORCE
An ultra-low-VOC treatment for exterior wood where a natural weathered or vintage appearance is desired.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
An ultra-low-VOC treatment for exterior wood where a natural weathered or vintage appearance is desired.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
WOODFORCE
Sansin WoodForce Product Data Sheet
Read the full product requirements, application instructions and limitations.
Safety data sheet – WOODFORCE
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
An ultra-low-VOC treatment for exterior wood where a natural weathered or vintage appearance is desired.
It repels water while allowing wood to breathe and is designed to limit blackening, discolouration and rot. WoodForce Clear provides protection while wood weathers; Accel speeds the weathering effect; the Vintage System uses colour and application technique to create a chosen aged look. Standard and custom colour effects are available. Refer to the technical sheet for the selected system.
Recommended uses
Exterior & decks Exterior treatments Exterior wood- Coverage
4.90-8.58sq.m/L (200-350 sq.ft/US Gallon)
- Application method
• Apply product by brush or flood coat – hand or automated spraying
- Drying time
Drying Time (to touch) @ 20ºC (68ºF): ~2 hours Drying Time before Packaging: Up to 24 Hours, Test accordingly
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Colours &
finish options.
Start with a few colour references, then explore the full collection.
Colours
Pale Gray WF-01 Mist Gray WF-02 Granite Gray WF-03 Slate Gray WF-04 Comet WF-05 Basalt Brown WF-06 Taupe WF-07 Coffee WF-08 Charcoal WF-09 Pigeon Gray WF-11 Hatteras Gray WF-12 Thunder WF-13 Oyster WF-14 Ash WF-15 Burnt Sienna WF-16 Pepper Red WF-17 Venetian Red WF-18 Brown Sugar WF-19 Dakota WF-20 Nut Brown WF-21 Umber WF-22 Tawny Brown WF-23 Beach Sand WF-24 Terra Rosa WF-25 Sunrise Red WF-26 Bloom Red WF-27 Pearl Gray WF-28 Cool Gray WF-29 Sky Gray WF-30 Sepia WF-31 Russet WF-32 Pickled White WF-33 Stone Gray WF-34 Onyx WF-35
Sansin
WoodForce
Pale Gray WF-01
Basalt Brown WF-06
Pigeon Gray Wf-11
Burnt Sienna WF-16
Nut Brown WF-21
Sunrise Red WF-26
Sky Gray WF-30
Onyx WF-35Screen colours are approximate. These are collection references; colour and tint-base availability can vary by product. Confirm the colour and finish with our team and a physical sample. Wood species, preparation and application affect stain colour.
Product & project gallery
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCE
WOODFORCEComplete your project.
Companion products for the selected product and system.
MULTI-WASH
Clean an existing finished wood surface before a maintenance coat.
For maintenance cleaning, use the label dilution, test first and rinse thoroughly. Let the surface dry before coating; cleaning does not replace stripping or sanding when needed.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about WOODFORCE