Sand with precision. Finish with Mirka.

1.25″ Angled Orbital Battery Sander, 3mm orbit

Mirka® spot repair sander is small, ergonomic, and energy efficient. Comes with two backing pads, charger, and extra battery.

Sanding

9″ MIRKA® LEROS Dust-Free PREMIUM Solution Kit

A professional-grade PREMIUM Dust-Free sanding Solution for walls and ceilings for the perfect drywall finish!

Abralon 6″ Grip

Abralon® is a patented, flexible abrasive for smooth sanding on angled surfaces and edges. Use dry and wet.

Sanding

Abranet ® 6″ Grip

Abranet’s dust-free sanding results in a cleaner work environment and a better surface finish.

Sanding

Backing Pad 9” 25H Grip + 8 screws

Installed with both grips and screws (8) for the most secure attachment.

Sanding

Backing pad NET 6″ 48H

Ideal for sanding contoured areas, especially to soften edges. 6" sanding pad with central air inlet. The air supply circuits lead the air to the centre of the pad. They increase airflow and thus facilitate…

Clean-Up Kit for Dust Extractors

A kit made for cleaning Mirka dust extractors.

Cutoff Wheel Bulldog A60TBXX

Fast cutting wheels, 3 in. diameter with 3/8” centre hole. Rated to 24,000 rpm.

Cut-off

Cutoff Wheel Royal AS60SBXX

Fast cutting wheels, 3 in. diameter with 3/8” centre hole. Rated to 24,000 rpm.

Cut-off

Dry Guide Coat, black

For light colour surfaces, the powder makes all imperfections visible.

Dustbag Fleece for DE 1230

Fleece dust bag to be used with Mirka dust extractors 1230.

Extension shaft for LEROS

With the 56.3" sanding arm and T-handle, you'll reach the same height as a 63" machine.

Fairing

Fairing for LEROS.

Fairing cover MIW9513111

Fairing cover for LEROS.

Foam Tape

The traditional, high-density, soft foam tape for sealing of all common bodywork gaps.

Masking

Goldflex Soft roll 4.5X5″ Plain

Goldflex Soft is perfect for sanding profiled surfaces and irregular, difficult-to-reach details by hand.

Sanding

Hand Block Kit 2.75″x 7.75″ Grip 40H

A multipurpose tool for sanding on concave, convex and flat shaped surfaces.

Hand Sanding Block 2.75″x 7.75″ Grip 22H

Combined with strips from Mirka's Net range, its performance is excellent.

HEPA filter for Dust Extractor

This filter can be installed in addition to the standard filter to improve the filtration.

Hose for Hand Block 0.75″ x 13′

Hose plus air inlet connector to use a hand sanding block as part of a dust-free system.

Interface 3 x 5 x .28″ 54 Holes Grip

The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours.

Interface Styro 9″ 8+1 holes Grip

Interface developed for sanding painted STUCCO as well as polystyrene insulation panels. Suits ® Mirka LEROS and LEROS-S wall sanders.

Sanding

Iridium 2.75″x33.5′ Perf-Roll, Grip, 20H

A premium paper abrasive for universal sanding, Iridium stays sharp and practically repels dust.

Sanding

Iridium SR 1.25″, PSA

A premium finessing abrasive used in the finest finishing stages of vehicle repair and manufacturing.

Sanding · Spot Repair

Iridium™ Soft 6″ Grip Multifit Discs

Iridium™ Soft foam abrasive discs for dust-free automotive dry sanding.

Pre-polishing · Sanding

Iridium™ Styro 9″ 9 holes Grip

Special version of the Mirka Iridium abrasive, developed for sanding painted STUCCO and polystyrene insulation panels.

Sanding

LEROS 9″ 5.0 mm orbit w/bag

The Mirka® LEROS is a brushless electric random orbital sander for walls and ceilings. This 9-inch model has a 5.0 mm orbit and weighs less than 3.5 kg, helping reduce the effort of extended sanding…

Sanding