207 SPECIAL CLEAR HARDENER
207 SPECIAL CLEAR HARDENER 207 Special Clear Hardener® was developed for coating and fibreglass cloth application where an exceptionally clear, moisture-resistant, carbon fibre or natural wood finish is desired.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
207 SPECIAL CLEAR HARDENER 207 Special Clear Hardener® was developed for coating and fibreglass cloth application where an exceptionally clear, moisture-resistant, carbon fibre or natural wood finish is desired.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Mix ratio | 3 parts resin to 1 part hardener by volume |
|---|---|
| Pot life | At 72°F (22°C): 20 to 26 minutes (100 g cupful) |
| Working time | At 72°F (22°C): 100 to 120 minutes (thin film) |
| Solid-state cure | At 72°F (22°C): 10 to 15 hours |
| Minimum curing temperature | At 60°F (16°C) |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
207 SDS
Product safety and handling information.
Safety data sheet – 207 SPECIAL CLEAR HARDENER
Product safety and handling information.
105-207 Epoxy Resin
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
207 SPECIAL CLEAR HARDENER 207 Special Clear Hardener® was developed for coating and fibreglass cloth application where an exceptionally clear, moisture-resistant, carbon fibre or natural wood finish is desired.
207 Special Clear Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings. The mix ratio is 3 parts resin to 1 part hardener by volume. Selection Guide.
Recommended uses
Wood & cabinetry.
Composite epoxy Epoxies- Mix ratio
- 3 parts resin to 1 part hardener by volume
- Pot life
- At 72°F (22°C): 20 to 26 minutes (100 g cupful)
- Working time
- At 72°F (22°C): 100 to 120 minutes (thin film)
- Solid-state cure
- At 72°F (22°C): 10 to 15 hours
- Minimum curing temperature
- At 60°F (16°C)
Product & project gallery
Complete your project.
Companion products for the selected product and system.
300 Mini Pumps
Meter resin and hardener accurately for the 105 System.
For Group A, B and C containers only. Fit the correct hardener pump and tubes for your container size.
105 Epoxy Resin
The resin used with WEST SYSTEM 200-series hardeners.
Choose matching resin and hardener group sizes and follow the specified mix ratio.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about 207 SPECIAL CLEAR HARDENER