AquaSeal Clear Acrylic Water Repellant
A clear acrylic water-repellent sealer for interior and exterior concrete and masonry. Helps limit moisture infiltration and related surface damage.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A clear acrylic water-repellent sealer for interior and exterior concrete and masonry. Helps limit moisture infiltration and related surface damage.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 43700 |
|---|---|
| Sheen | Eggshell or Satin |
| Category | Interior Topcoat / Exterior Topcoat |
| Chemistry | Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 10% |
| Weight solids | 11% |
| Density | 8.4 lbs per gallon. Container extra |
| Film thickness | Wet: 5.0 - 16.0 mils (125 - 400 microns) Dry: 0.5 - 1.6 mils (13 - 40 microns) |
| Viscosity | 23 - 28 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
AquaSeal Clear Acrylic Water Repellant
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 43700 - Aqua Seal Clear Acrylic Water Repellant (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A clear acrylic water-repellent sealer for interior and exterior concrete and masonry. Helps limit moisture infiltration and related surface damage.
Recommended uses
Interior and exterior concrete and masonry sealing.
Exterior surfaces- Finish
Eggshell or Satin
- Coverage
100 - 300 ft² per gallon (2.5 - 7.5 m²/L)
- Application method
Brush: Polyester Roller: 10 - 20mm lint free sleeve H.V.L.P Spray: 1.1 cap needle set Airless Spray: Pressure 1200 - 1800 psi, Tip .011” - .013”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 15 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 2 - 4 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Non-flammable formulation.
- Product Code
- 43700
- Sheen
- Eggshell or Satin
- Category
- Interior Topcoat / Exterior Topcoat
- Chemistry
- Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 10%
- Weight solids
- 11%
- Density
- 8.4 lbs per gallon. Container extra
- Film thickness
- Wet: 5.0 - 16.0 mils (125 - 400 microns) Dry: 0.5 - 1.6 mils (13 - 40 microns)
- Viscosity
- 23 - 28 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Eggshell or Satin
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about AquaSeal Clear Acrylic Water Repellant