ClovaShield 838: Acrylic Epoxy
A Cloverdale industrial topcoat.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A Cloverdale industrial topcoat.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 83800A |
|---|---|
| Category | DTM Coatings and Topcoats |
| Catalogue range | Industrial |
| Film thickness | N/A Wet: 3.9 - 5.8 mils Dry: 2 - 3 mils THINNER See your Cloverdale Representative for project C-760-1 Slow Evaporating recommendations. C-760-2 Fast Evaporating |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
ClovaShield 838: Acrylic Epoxy
Technical Data Sheet (English)
Read the full product requirements, application instructions and limitations.
SDS - 83800A - ClovaShield 838: Acrylic Epoxy (English)
Product safety and handling information.
SDS - 83804A - ClovaShield 838: Acrylic Epoxy Black (English)
Product safety and handling information.
SDS - 83815A - ClovaShield 838: Acrylic Epoxy Safety Yellow (English)
Product safety and handling information.
SDS - 83840A - ClovaShield 838: Acrylic Epoxy Low Gloss Black (English)
Product safety and handling information.
SDS - 83843A - ClovaShield 838: Acrylic Epoxy Gloss Black (English)
Product safety and handling information.
SDS - 83844A - ClovaShield 838: Acrylic Epoxy RAL 9016 (English)
Product safety and handling information.
83800B - Link to ClovaShield 838: PART B - SDS File (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A Cloverdale industrial topcoat.
Recommended uses
For dtm coatings and topcoats applications. Check the technical sheet for the supported substrates, required preparation and compatible coating system.
Industrial- Coverage
ACCELERATOR 834 ft2/gal @1 mil (25 microns) DFT N/A 20.5 m2/L @ 1 mil (25 microns) DFT
- Application method
AIRLESS SPRAY Speeflo Atlas 30:1 with tip sizes .009" - .013" or equivalent H.V.L.P. Binks Model Mach 1 92 x 95AP (pressure) or equivalent CONVENTIONAL Binks Model 95GUN 63CSS X 63PB (pressure) or equivalent BRUSH / ROLLER Brushing is limited to small areas or for touch up.
- Drying time
25oC (77oF): Touch dry 30 minutes; hard/handle dry 12 hours 15oC (60oF): Touch dry 1 hour; hard/handle dry 24 hours 5oC (41oF): Touch dry 2 hours; hard/handle dry 36 hours
- Recoat time
25oC (77oF): Minimum 3 hours; maximum indefinite; normal 12 hours 15oC (60oF): Minimum 6 hours; maximum indefinite; normal 18 hours 5oC (41oF): Minimum 9 hours; maximum indefinite; normal 24 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product Code
- 83800A
- Category
- DTM Coatings and Topcoats
- Catalogue range
- Industrial
- Film thickness
- N/A Wet: 3.9 - 5.8 mils Dry: 2 - 3 mils THINNER See your Cloverdale Representative for project C-760-1 Slow Evaporating recommendations. C-760-2 Fast Evaporating
Colours &
finish options.
Explore the published colour and finish information for this product.
Confirm the colour, finish and availability with our team and a physical sample.
Complete your project.
Companion products for the selected product and system.
Cloverdale ClovaShield 838 Acrylic Epoxy Catalyst, Part B
The specified ClovaShield 838 catalyst.
For ClovaShield 838 only. Mix four parts 838 Series Part A with one part 83800B by volume. This system requires C-760 urethane thinner when thinning is specified; do not use conventional epoxy thinner.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about ClovaShield 838: Acrylic Epoxy