Concrete Sealer – Water-Based
Seal King’s Water-Based Concrete Sealer is specially formulated from acrylic polymers and water to seal concrete, stamped or otherwise.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
Seal King’s Water-Based Concrete Sealer is specially formulated from acrylic polymers and water to seal concrete, stamped or otherwise.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product range | Concrete |
|---|---|
| Manufacturer coverage | Will cover approximately 200 sq. ft. / 1 gal. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Concrete Sealer – Water-Based
TDS Water-Based Concrete Sealer
Read the full product requirements, application instructions and limitations.
SDS Water-Based Concrete Sealer – High Gloss
Product safety and handling information.
SDS Water-Based Concrete Sealer – Matte
Product safety and handling information.
SDS Water-Based Concrete Sealer – Semi-Gloss
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Seal King’s Water-Based Concrete Sealer is specially formulated from acrylic polymers and water to seal concrete, stamped or otherwise.
It creates a protective film that resists water, stains, and light abrasion. It will also reduce dusting, making the floor easier to clean, great for a garage. This product can also reduce surface dampness caused by humidity condensing on a cold surface. This product is good for both indoor and outdoor use, environmentally friendly, and easy to use.
Exterior project planning
- Air temperature
- Check manufacturer instructions
- Surface temperature
- Check manufacturer instructions
Apply only when the concrete surface is strictly above 4°C. That strict threshold is recorded in the instructions rather than as an inclusive minimum. No separate air-temperature limit, maximum surface temperature or fixed rain-free interval is specified in the checked sheet. The surface must be clean and free of standing water; test compatibility with any previous coating. The sheet lists about 2.5 hours to touch-dry and 24 hours to full cure. These are drying estimates, not permission to apply during unsuitable weather. Protect the container from freezing.
Check the air, the actual surface, overnight conditions and the full drying or curing period. The current product label takes precedence.
Recommended uses
Concrete
- Product range
- Concrete
- Manufacturer coverage
- Will cover approximately 200 sq. ft. / 1 gal.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Concrete Sealer – Water-Based