Devran 201H
A high performance, chemically cured, rust inhibitive epoxy primer for interior or exterior steel, galvanized metal or aluminium surfaces. *Please note this product is only available in North America.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A high performance, chemically cured, rust inhibitive epoxy primer for interior or exterior steel, galvanized metal or aluminium surfaces. *Please note this product is only available in North America.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Epoxy |
|---|---|
| Product Chemistry | Epoxy |
| Volume Solids | 58 |
| VOC content (EPA method) | 327 g/lt |
| Colour Options | Light Gray |
| Maximum Dry film thickness | 75 |
| Minimum Dry film thickness | 50 |
| Number of components | Multi Pack |
| Chemistry | Epoxy |
| Mixing ratio | 9 part(s) : 1 part(s) by volume |
| Pot life | 68°F (20°C) 77°F (25°C) 12 hours 12 hours |
| Film thickness | 2-3 mils (50-75 microns) dry equivalent to 3.4-5.2 mils (86-129 microns) wet |
| VOC | 2.72 lb/gal (327 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA610. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. All surplus material and empty containers should be disposed of in accordance with appropriate regional regulations/legislation. |
| Thinning | Not normally required See Product Characteristics section for further details |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Devran
201H
TDS · Devran 201H (en_US)
Read the full product requirements, application instructions and limitations.
SDS · Devran 201H · Low VOC Light Grey Part A (Canada, English, 2019)
Product safety and handling information.
SDS · Devran 201H · Low VOC Light Grey Kit (Canada, English, 2019)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A high performance, chemically cured, rust inhibitive epoxy primer for interior or exterior steel, galvanized metal or aluminium surfaces. *Please note this product is only available in North America.
Recommended uses
Industrial, Commercial, Metal, Exterior surfaces.
Industrial coating Priming & sealing- Finish
Matte
- Coverage
369 sq.ft/US gallon at 2.5 mils d.f.t and stated volume solids 9.20 m²/litre at 63 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Roller, Air Spray, Brush
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Primer-Epoxy
- Product Chemistry
- Epoxy
- Volume Solids
- 58
- VOC content (EPA method)
- 327 g/lt
- Colour Options
- Light Gray
- Maximum Dry film thickness
- 75
- Minimum Dry film thickness
- 50
- Number of components
- Multi Pack
- Chemistry
- Epoxy
- Mixing ratio
- 9 part(s) : 1 part(s) by volume
- Pot life
- 68°F (20°C) 77°F (25°C) 12 hours 12 hours
- Film thickness
- 2-3 mils (50-75 microns) dry equivalent to 3.4-5.2 mils (86-129 microns) wet
- VOC
- 2.72 lb/gal (327 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA610. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. All surplus material and empty containers should be disposed of in accordance with appropriate regional regulations/legislation.
- Thinning
- Not normally required See Product Characteristics section for further details
Complete your project.
Companion products for the selected product and system.
Bar-Rust 235
A listed epoxy coating for the protective system.
Use only in a specified compatible system. Confirm preparation, film thickness and recoat intervals.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Devran 201H