Interlac 665
A single component alkyd gloss enamel finish.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A single component alkyd gloss enamel finish.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Finish-Alkyd |
|---|---|
| Product Chemistry | Alkyd |
| Volume Solids | 48 |
| VOC content (EPA method) | 420 g/lt |
| Colour Options | Available on Chromascan |
| Maximum Dry film thickness | 50 |
| Minimum Dry film thickness | 40 |
| Number of components | Single Pack |
| Chemistry | Alkyd |
| Components | Single-component |
| Film thickness | 40-50 microns (1.6-2 mils) dry equivalent to 83-104 microns (3.3-4.2 mils) wet |
| VOC | 3.50 lb/gal (420 g/lt) EPA Method 24 364 g/kg EU Solvent Emissions Directive (Council Directive 2010/75/EU) |
| Cleanup | Clean all equipment immediately after use with GTA004. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA004 Do not thin more than allowed by local environmental legislation |
| Mixing ratio | Not applicable. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interlac
665
TDS · Interlac 665 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERLAC 665 BASE LIGHT (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BASE DEEP (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BASE ULTRA DEEP (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BASE RED (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BLUE WHITE (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BASE YELLOW (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 WHITE (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 YELLOW (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 ENSIGN RED (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 SIGNAL RED (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 INTL. ORANGE (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 SURF GREY (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 STORM GREY (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 RED (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 SIGNAL GREEN (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BLACK (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 FRENCH GREY (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665 BASE LIGHT (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BASE DEEP (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BASE ULTRA DEEP (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BASE RED (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BLUE WHITE (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BASE YELLOW (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 WHITE (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 YELLOW (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 ENSIGN RED (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 SIGNAL RED (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 INTL. ORANGE (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 SURF GREY (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 FRENCH GREY (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 STORM GREY (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 RED (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 SIGNAL GREEN (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BLUE (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 MEDIUM GREY (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 GREEN (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 DARK BLUE (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 BLACK (en_US)
Product safety and handling information.
MSDS · INTERLAC 665 RAL9003 SIGNAL WHITE (en_US)
Product safety and handling information.
Proof of Performance · Power Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Mining and Minerals Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A single component alkyd gloss enamel finish.
Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants. Suitable for areas of limited chemical exposure where an economical single pack finish coat is required. As a cosmetic finish coat for alkyd based systems intended for both interior and exterior exposure.
Recommended uses
Exterior decks, Industrial, Commercial.
Industrial coating Marine- Finish
High Gloss
- Coverage
481 sq.ft/US gallon at 1.6 mils d.f.t and stated volume solids 12 m²/litre at 40 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Air Spray, Brush, Roller
- Drying time
50°F (10°C): Touch dry 14 hours; hard/handle dry 48 hours 59°F (15°C): Touch dry 10 hours; hard/handle dry 36 hours 77°F (25°C): Touch dry 6 hours; hard/handle dry 24 hours 104°F (40°C): Touch dry 4 hours; hard/handle dry 8 hours
- Recoat time
50°F (10°C): Minimum 24 hours; maximum Extended¹ 59°F (15°C): Minimum 24 hours; maximum Extended¹ 77°F (25°C): Minimum 24 hours; maximum Extended¹ 104°F (40°C): Minimum 14 hours; maximum Extended¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Finish-Alkyd
- Product Chemistry
- Alkyd
- Volume Solids
- 48
- VOC content (EPA method)
- 420 g/lt
- Colour Options
- Available on Chromascan
- Maximum Dry film thickness
- 50
- Minimum Dry film thickness
- 40
- Number of components
- Single Pack
- Chemistry
- Alkyd
- Components
- Single-component
- Film thickness
- 40-50 microns (1.6-2 mils) dry equivalent to 83-104 microns (3.3-4.2 mils) wet
- VOC
- 3.50 lb/gal (420 g/lt) EPA Method 24 364 g/kg EU Solvent Emissions Directive (Council Directive 2010/75/EU)
- Cleanup
- Clean all equipment immediately after use with GTA004. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA004 Do not thin more than allowed by local environmental legislation
- Mixing ratio
- Not applicable.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interlac 665