Interlac 665FD
A quick drying alkyd high gloss enamel available in a wide range of colours. Used as a high gloss enamel finish for interior and exterior applications. Suitable for mild industrial and commercial environments. Particularly suited for fabrication facility application.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A quick drying alkyd high gloss enamel available in a wide range of colours. Used as a high gloss enamel finish for interior and exterior applications. Suitable for mild industrial and commercial environments. Particularly suited for fabrication facility application.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Finish-Alkyd |
|---|---|
| Product Chemistry | Alkyd |
| Volume Solids | 37 |
| VOC content (EPA method) | 539 g/lt |
| Maximum Dry film thickness | 50 |
| Minimum Dry film thickness | 38 |
| Number of components | Single Pack |
| Chemistry | Alkyd |
| Mixing ratio | Not applicable. |
| Film thickness | 1.5-2 mils (38-50 microns) dry equivalent to 4.1-5.4 mils (103-135 microns) wet |
| VOC | 4.49 lb/gal (539 g/l) USA - EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA007. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA007 Do not thin more than allowed by local environmental legislation. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interlac
665FD
TDS · Interlac 665FD (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERLAC 665FD BASE LIGHT (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE DEEP (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE ULTRA DEEP (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE YELLOW (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE RED (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD WHITE (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD BLACK (en_CA)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE LIGHT (en_US)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE DEEP (en_US)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE ULTRA DEEP (en_US)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE YELLOW (en_US)
Product safety and handling information.
MSDS · INTERLAC 665FD BASE RED (en_US)
Product safety and handling information.
MSDS · INTERLAC 665FD WHITE (en_US)
Product safety and handling information.
MSDS · INTERLAC 665FD BLACK (en_US)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A quick drying alkyd high gloss enamel available in a wide range of colours. Used as a high gloss enamel finish for interior and exterior applications. Suitable for mild industrial and commercial environments. Particularly suited for fabrication facility application.
Recommended uses
Industrial.
Industrial coating- Finish
Gloss
- Coverage
390 sq.ft/US gallon at 1.5 mils d.f.t and stated volume solids 9.70 m²/litre at 38 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Brush, Roller
- Drying time
50°F (10°C): Touch dry 1.5 hours; hard/handle dry 20 hours 59°F (15°C): Touch dry 1 hour; hard/handle dry 16 hours 77°F (25°C): Touch dry 30 minutes; hard/handle dry 5 hours 104°F (40°C): Touch dry 15 minutes; hard/handle dry 2 hours
- Recoat time
50°F (10°C): Minimum 24 hours; maximum Extended¹ 59°F (15°C): Minimum 24 hours; maximum Extended¹ 77°F (25°C): Minimum 20 hours; maximum Extended¹ 104°F (40°C): Minimum 6 hours; maximum Extended¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Finish-Alkyd
- Product Chemistry
- Alkyd
- Volume Solids
- 37
- VOC content (EPA method)
- 539 g/lt
- Maximum Dry film thickness
- 50
- Minimum Dry film thickness
- 38
- Number of components
- Single Pack
- Chemistry
- Alkyd
- Mixing ratio
- Not applicable.
- Film thickness
- 1.5-2 mils (38-50 microns) dry equivalent to 4.1-5.4 mils (103-135 microns) wet
- VOC
- 4.49 lb/gal (539 g/l) USA - EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA007. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA007 Do not thin more than allowed by local environmental legislation.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interlac 665FD