Interline 975P
A two component, solvent free, heavy duty epoxy tank lining.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A two component, solvent free, heavy duty epoxy tank lining.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Lining-Epoxy |
|---|---|
| Product Chemistry | Epoxy |
| Volume Solids | 100 |
| VOC content (EPA method) | 0 g/lt |
| Maximum Dry film thickness | 600 |
| Minimum Dry film thickness | 300 |
| Number of components | Multi Pack |
| Attributes | Solvent Free |
| Chemistry | Epoxy |
| Components | Two-component |
| Mixing ratio | 2 part(s) : 1 part(s) by volume |
| Pot life | 50°F (10°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 90 minutes 80 minutes 55 minutes 35 minutes |
| Film thickness | 12-24 mils (300-600 microns) dry equivalent to 12-24 mils (300-600 microns) wet 400-1000 microns (16-40 mils) for use as a single coat on tank floors. Thickness is dependent upon application method and specification. |
| VOC | 0.00 lb/gal (0 g/lt) EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA853. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | DO NOT THIN |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interline
975P
TDS · Interline 975P (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERLINE 975P WHITE PART A (en_CA)
Product safety and handling information.
MSDS · INTERLINE 975P PART B (en_CA)
Product safety and handling information.
MSDS · INTERLINE 975P WHITE PART A (en_US)
Product safety and handling information.
MSDS · INTERLINE 975P PART B (en_US)
Product safety and handling information.
Application guidelines · Interline 975P Application Guidelines (English · global)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A two component, solvent free, heavy duty epoxy tank lining.
For application to steel tank internals to provide corrosion resistance to a range of products including crude oil, white oils and potable water. When used for potable water applications, please review the approval available at www.nsf.org for current listing information. Meets the applicable health effects criteria of NSF/ANSI/CAN 600 according to the requirements of NSF/ANSI/CAN 61. Certified to NSF/ANSI/CAN Standard 61.
Recommended uses
Industrial.
Industrial coating- Coverage
89 sq.ft/US gallon at 18 mils d.f.t and stated volume solids 2.22 m²/litre at 450 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Plural component airless spray
- Drying time
50°F (10°C): Touch dry 15 hours; hard/handle dry 36 hours 59°F (15°C): Touch dry 12 hours; hard/handle dry 24 hours 77°F (25°C): Touch dry 7 hours; hard/handle dry 16 hours 104°F (40°C): Touch dry 3 hours; hard/handle dry 6 hours
- Recoat time
50°F (10°C): Minimum 36 hours; maximum 28 days¹ 59°F (15°C): Minimum 24 hours; maximum 28 days¹ 77°F (25°C): Minimum 16 hours; maximum 21 days¹ 104°F (40°C): Minimum 6 hours; maximum 14 days¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Requires a two-component mixture.
- Product type
- Lining-Epoxy
- Product Chemistry
- Epoxy
- Volume Solids
- 100
- VOC content (EPA method)
- 0 g/lt
- Maximum Dry film thickness
- 600
- Minimum Dry film thickness
- 300
- Number of components
- Multi Pack
- Attributes
- Solvent Free
- Chemistry
- Epoxy
- Components
- Two-component
- Mixing ratio
- 2 part(s) : 1 part(s) by volume
- Pot life
- 50°F (10°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 90 minutes 80 minutes 55 minutes 35 minutes
- Film thickness
- 12-24 mils (300-600 microns) dry equivalent to 12-24 mils (300-600 microns) wet 400-1000 microns (16-40 mils) for use as a single coat on tank floors. Thickness is dependent upon application method and specification.
- VOC
- 0.00 lb/gal (0 g/lt) EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA853. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- DO NOT THIN
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interline 975P