Interplus 256
Interplus 256 is a low VOC, two component high build surface tolerant epoxy primer with optimized application and performance characteristics for use over a wide temperature range.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
Interplus 256 is a low VOC, two component high build surface tolerant epoxy primer with optimized application and performance characteristics for use over a wide temperature range.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Surface Tolerant-Surface Tolerant Epoxy |
|---|---|
| Product Chemistry | Surface Tolerant Epoxy |
| Volume Solids | 80 |
| VOC content (EPA method) | 265 g/lt |
| Colour Options | Aluminium |
| Maximum Dry film thickness | 150 |
| Minimum Dry film thickness | 75 |
| Number of components | Multi Pack |
| Chemistry | Epoxy |
| Components | Two-component |
| Mixing ratio | 3.0 part(s) : 1.0 part(s) by volume |
| Pot life | 10°C (50°F) 15°C (59°F) 25°C (77°F) 40°C (104°F) 2 hours 90 minutes 60 minutes 30 minutes |
| Film thickness | 75-150 microns (3-6 mils) dry equivalent to 94-188 microns (3.8-7.5 mils) wet |
| VOC | 2.21 lb/gal (265 g/l) USA - EPA Method 24 |
| Cleanup | Clean all equipment immediately after use with International GTA822. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA220 Do not thin more than allowed by local environmental legislation |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interplus
256
TDS · Interplus 256 (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERPLUS 256 ALUMINIUM PART A (en_CA)
Product safety and handling information.
MSDS · INTERPLUS 256 PART B (en_CA)
Product safety and handling information.
MSDS · INTERPLUS 256 ALUMINIUM PART A (en_US)
Product safety and handling information.
MSDS · INTERPLUS 256 PART B (en_US)
Product safety and handling information.
Proof of Performance · Bridges Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Infrastructure Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Wind Power (English · global)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Interplus 256 is a low VOC, two component high build surface tolerant epoxy primer with optimized application and performance characteristics for use over a wide temperature range.
A quick drying high performance industrial maintenance coating, Interplus 256 is ideal for aggressive offshore environments. Pigmented with aluminum and MIO for improved anticorrosive barrier protection.
Recommended uses
Industrial, Commercial, Metal.
Industrial coating Marine- Finish
Eggshell
- Coverage
257 sq.ft/US gallon at 5 mils d.f.t and stated volume solids 6.40 m²/litre at 125 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Air Spray, Brush, Roller
- Drying time
50°F (10°C): Touch dry 12 hours; hard/handle dry 22 hours 59°F (15°C): Touch dry 9 hours; hard/handle dry 16 hours 77°F (25°C): Touch dry 5 hours; hard/handle dry 9 hours 104°F (40°C): Touch dry 2 hours; hard/handle dry 6 hours
- Recoat time
50°F (10°C): Minimum 22 hours; maximum Extended¹ 59°F (15°C): Minimum 16 hours; maximum Extended¹ 77°F (25°C): Minimum 9 hours; maximum Extended¹ 104°F (40°C): Minimum 6 hours; maximum Extended¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Requires a two-component mixture.
- Manufacturer identifies a low-VOC formulation.
- Product type
- Surface Tolerant-Surface Tolerant Epoxy
- Product Chemistry
- Surface Tolerant Epoxy
- Volume Solids
- 80
- VOC content (EPA method)
- 265 g/lt
- Colour Options
- Aluminium
- Maximum Dry film thickness
- 150
- Minimum Dry film thickness
- 75
- Number of components
- Multi Pack
- Chemistry
- Epoxy
- Components
- Two-component
- Mixing ratio
- 3.0 part(s) : 1.0 part(s) by volume
- Pot life
- 10°C (50°F) 15°C (59°F) 25°C (77°F) 40°C (104°F) 2 hours 90 minutes 60 minutes 30 minutes
- Film thickness
- 75-150 microns (3-6 mils) dry equivalent to 94-188 microns (3.8-7.5 mils) wet
- VOC
- 2.21 lb/gal (265 g/l) USA - EPA Method 24
- Cleanup
- Clean all equipment immediately after use with International GTA822. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA220 Do not thin more than allowed by local environmental legislation
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interplus 256