Interprime 539
A single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Primer-Etch Primer |
|---|---|
| Product Chemistry | Etch Primer |
| Volume Solids | 24 |
| VOC content (EPA method) | 744 g/lt |
| Colour Options | Pink,Yellow |
| Maximum Dry film thickness | 20 |
| Minimum Dry film thickness | 10 |
| Number of components | Single Pack |
| Components | Single-component |
| Film thickness | 10-20 microns (0.4-0.8 mils) dry equivalent to 42-83 microns (1.7-3.3 mils) wet |
| VOC | 6.20 lb/gal (744 g/lt) EPA Method 24 701 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC) |
| Cleanup | Clean all equipment immediately after use with International GTA220. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Thinning | International GTA220 See Product Characteristics |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interprime
539
TDS · Interprime 539 (English · global)
Read the full product requirements, application instructions and limitations.
MSDS · INTERPRIME 539 YELLOW (en_CA)
Product safety and handling information.
MSDS · INTERPRIME 539 YELLOW (en_US)
Product safety and handling information.
Proof of Performance · Power Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate.
As a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel. Interprime 539 is particularly suitable for priming galvanised steel surfaces.
Recommended uses
Industrial, Commercial.
Industrial coating Priming & sealing- Finish
Matt
- Coverage
16 m²/litre at 15 microns d.f.t and stated volume solids 642 sq.ft/US gallon at 0.6 mils d.f.t and stated volume solids Allow appropriate loss factors
- Application method
Airless Spray, Air Spray, Brush, Roller
- Drying time
5°C (41°F): Touch dry 30 minutes; hard/handle dry 60 minutes 15°C (59°F): Touch dry 20 minutes; hard/handle dry 45 minutes 25°C (77°F): Touch dry 15 minutes; hard/handle dry 30 minutes 40°C (104°F): Touch dry 10 minutes; hard/handle dry 20 minutes
- Recoat time
5°C (41°F): Minimum 2 hours; maximum Extended¹ 15°C (59°F): Minimum 60 minutes; maximum Extended¹ 25°C (77°F): Minimum 60 minutes; maximum Extended¹ 40°C (104°F): Minimum 60 minutes; maximum Extended¹
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product type
- Primer-Etch Primer
- Product Chemistry
- Etch Primer
- Volume Solids
- 24
- VOC content (EPA method)
- 744 g/lt
- Colour Options
- Pink,Yellow
- Maximum Dry film thickness
- 20
- Minimum Dry film thickness
- 10
- Number of components
- Single Pack
- Components
- Single-component
- Film thickness
- 10-20 microns (0.4-0.8 mils) dry equivalent to 42-83 microns (1.7-3.3 mils) wet
- VOC
- 6.20 lb/gal (744 g/lt) EPA Method 24 701 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC)
- Cleanup
- Clean all equipment immediately after use with International GTA220. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
- Thinning
- International GTA220 See Product Characteristics
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interprime 539