Interseal 670HS
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal 670HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal 670HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product type | Other- |
|---|---|
| Volume Solids | 82 |
| VOC content (EPA method) | 240 g/lt |
| Colour Options | Available on Chromascan |
| Maximum Dry film thickness | 250 |
| Minimum Dry film thickness | 100 |
| Number of components | Multi Pack |
| Chemistry | Epoxy |
| Components | Two-component |
| Mixing ratio | 5.67 parts : 1.00 part by volume |
| Pot life | 50°F (10°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 5 hours 3 hours 2 hours 1 hour |
| Film thickness | 4-10 mils (100-250 microns) dry equivalent to 4.9-12.2 mils (122-305 microns) wet |
| VOC | 114 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC) 2.00 lb/gal (240 g/lt) EPA Method 24 151 g/lt Chinese National Standard GB23985 |
| Cleanup | Clean all equipment immediately after use with International GTA822. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. All surplus materials and empty containers should be disposed of in accordance with appropriate regional regulations/legislation. |
| Thinning | International GTA220 Thinning is not normally required. Consult the local representative for advice during application in extreme conditions. Do not thin more than allowed by local environmental legislation. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Interseal
670HS
TDS · Interseal 670HS (en_US)
Read the full product requirements, application instructions and limitations.
MSDS · INTERSEAL 670HS ALUMINIUM PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS BLACK PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS WHITE PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS BUFF PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS RED PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS BASE ULTRA DEEP PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS BASE LIGHT PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS PART B (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS BASE YELLOW PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS PEARL GREY PART A (en_CA)
Product safety and handling information.
MSDS · INTERSEAL 670HS ALUMINIUM PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS BLACK PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS WHITE PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS BUFF PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS RED PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS BASE ULTRA DEEP PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS BASE LIGHT PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS PART B (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS BASE YELLOW PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS RAL1021 YELLOW PART A (en_US)
Product safety and handling information.
MSDS · INTERSEAL 670HS PEARL GREY PART A (en_US)
Product safety and handling information.
Proof of Performance · Power Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Bridges Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · 30 Year Upgrade for Tank Lining System (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Upstream Oil & Gas Proof of Performance (English · global)
Read the manufacturer’s instructions and product information.
Proof of Performance · Paco Power Plant FGD Track Record (en_US)
Read the manufacturer’s instructions and product information.
Proof of Performance · Marathon Alba Living Quarters (en_US)
Read the manufacturer’s instructions and product information.
Proof of Performance · Weatherford Casing Tongs (en_US)
Read the manufacturer’s instructions and product information.
Proof of Performance · Apache E.C. 278 B Waterline Project (en_US)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal 670HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service.
Interseal 670HS is suitable for application to a wide range of substrates and aged coatings.
Recommended uses
Exterior decks, Marine, Industrial, Commercial.
Industrial coating- Finish
Semi-gloss (Aluminum is eggshell)
- Coverage
263 sq.ft/US gallon at 5 mils d.f.t and stated volume solids 6.56 m2/litre at 125 microns d.f.t and stated volume solids Allow appropriate loss factors
- Application method
can be
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Requires a two-component mixture.
- Manufacturer identifies a low-VOC formulation.
- Product type
- Other-
- Volume Solids
- 82
- VOC content (EPA method)
- 240 g/lt
- Colour Options
- Available on Chromascan
- Maximum Dry film thickness
- 250
- Minimum Dry film thickness
- 100
- Number of components
- Multi Pack
- Chemistry
- Epoxy
- Components
- Two-component
- Mixing ratio
- 5.67 parts : 1.00 part by volume
- Pot life
- 50°F (10°C) 59°F (15°C) 77°F (25°C) 104°F (40°C) 5 hours 3 hours 2 hours 1 hour
- Film thickness
- 4-10 mils (100-250 microns) dry equivalent to 4.9-12.2 mils (122-305 microns) wet
- VOC
- 114 g/kg EU Solvent Emissions Directive (Council Directive 1999/13/EC) 2.00 lb/gal (240 g/lt) EPA Method 24 151 g/lt Chinese National Standard GB23985
- Cleanup
- Clean all equipment immediately after use with International GTA822. It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. All surplus materials and empty containers should be disposed of in accordance with appropriate regional regulations/legislation.
- Thinning
- International GTA220 Thinning is not normally required. Consult the local representative for advice during application in extreme conditions. Do not thin more than allowed by local environmental legislation.
Complete your project.
Companion products for the selected product and system.
Interthane 990
An optional polyurethane finish for a specified protective system.
For atmospheric service. Confirm regional products, preparation, recoat intervals and the complete system with our team.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Interseal 670HS