Maintenance Enamel: ALUMINUM
A Cloverdale industrial topcoat. Finish: Gloss. Applications include metal surfaces.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A Cloverdale industrial topcoat. Finish: Gloss. Applications include metal surfaces.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 70242 |
|---|---|
| Sheen | Gloss |
| Category | DTM Coatings and Topcoats |
| Chemistry | Alkyd |
| Catalogue range | Industrial |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Maintenance Enamel: ALUMINUM
Technical Data Sheet (English)
Read the full product requirements, application instructions and limitations.
SDS - 70242 - Maintenance Enamel: ALUMINUM (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A Cloverdale industrial topcoat. Finish: Gloss. Applications include metal surfaces.
Recommended uses
metal surfaces.
Industrial- Finish
Gloss
- Coverage
449 ft2/gal @1 mil (25 microns) DFT 11 m2/L @ 1 mil (25 microns) DFT Actual coverage may vary depending on substrate and application methods. VISCOSITY
- Application method
AIRLESS SPRAY Speeflo Atlas 30:1 with tip sizes .013" - .015" or equivalent H.V.L.P. Binks Model Mach 1 94 x 97AP (pressure) or equivalent CONVENTIONAL Binks Model 95GUN 63CSS X 63PB (pressure) or equivalent BRUSH / ROLLER Brushing is limited to small areas or touch-up
- Drying time
25oC (77oF): Touch dry 30 minutes; hard/handle dry 12 hours
- Recoat time
25oC (77oF): Minimum 30 minutes; maximum indefinite; normal 2 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Designed for a short drying time.
- Designed for direct application to suitably prepared metal.
- Product Code
- 70242
- Sheen
- Gloss
- Category
- DTM Coatings and Topcoats
- Chemistry
- Alkyd
- Catalogue range
- Industrial
Colours &
finish options.
Explore the published colour and finish information for this product.
Maintenance Enamel Aluminum
Factory metallic finish, not a decorative tint range.
- Metallic Silver70242
- Sheen
- Gloss
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Maintenance Enamel: ALUMINUM