Prime Solution Acrylic Bonding Primer
A waterborne acrylic bonding primer for interior and exterior use on hard, non-porous surfaces. Its high-hiding formula is also useful when preparing for a substantial colour change.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
A waterborne acrylic bonding primer for interior and exterior use on hard, non-porous surfaces. Its high-hiding formula is also useful when preparing for a substantial colour change.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 05910 |
|---|---|
| Sheen | Primer - Sealer |
| Category | Primer, Sealer, Undercoat |
| Chemistry | Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 32% |
| Weight solids | 53% |
| Density | 11.20lbs per gallon. Container extra |
| Film thickness | Wet: 3.2 - 4.0 mils (81 - 102 microns) Dry: 1.0 - 1.3 mils (25 - 33 microns) |
| Viscosity | 88 - 93 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Prime Solution Acrylic Bonding Primer
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 05910 - Prime Solution Acrylic Bonding Primer (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A waterborne acrylic bonding primer for interior and exterior use on hard, non-porous surfaces. Its high-hiding formula is also useful when preparing for a substantial colour change.
Where to use it
Hard, non-porous substrates covered by the manufacturer’s surface-preparation instructions.
Recommended uses
Hard, non-porous substrates covered by the manufacturer’s surface-preparation instructions.
Cabinetry Metal surfaces Priming & sealing- Finish
Primer - Sealer
- Coverage
350 - 476 ft² per gallon (9.8 - 11.5 m²/L)
- Application method
Brush: Use a polyester brush Roller: Use a 3/8” - 3/4” nap synthetic cover H.V.L.P Spray: 10psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .013” - .017”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 15 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 60 - 90 minutes
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Low-VOC formulation.
- Designed for a short drying time.
- Water-based formulation.
- Product Code
- 05910
- Sheen
- Primer - Sealer
- Category
- Primer, Sealer, Undercoat
- Chemistry
- Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 32%
- Weight solids
- 53%
- Density
- 11.20lbs per gallon. Container extra
- Film thickness
- Wet: 3.2 - 4.0 mils (81 - 102 microns) Dry: 1.0 - 1.3 mils (25 - 33 microns)
- Viscosity
- 88 - 93 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Primer - Sealer
Complete your project.
Companion products for the selected product and system.
Bennett MP-X 2.5-inch Angular Sash Brush
Cut in edges and paint trim with an angled synthetic brush.
Choose the brush size for the work and follow the paint’s application directions.
Micro Pro®
An applicator option for rolling larger painted surfaces.
Choose the roller width and nap for your surface and the paint’s application directions.
Bennett Cotton Canvas Drop Cloth · 3 × 20 ft
Protect the work area while painting walls, ceilings or trim.
Choose enough drop cloths to cover the area around your project.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Prime Solution Acrylic Bonding Primer