Prime Solution Int/Ext Stain Blocking Primer, Alkyd
An alkyd stain-blocking primer for interior and exterior woodwork and siding. It seals the surface and helps control tannin staining from woods such as cedar and redwood before topcoating.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
An alkyd stain-blocking primer for interior and exterior woodwork and siding. It seals the surface and helps control tannin staining from woods such as cedar and redwood before topcoating.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 15130 |
|---|---|
| Sheen | Primer - Sealer |
| Category | Primer, Sealer, Undercoat |
| Chemistry | Alkyd |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 56% |
| Weight solids | 75% |
| Density | 12.71 lbs per gallon. Container extra |
| Film thickness | Wet: 2.0 - 3.3 mils (50 - 84 microns) Dry: 1.5 - 2.5 mils (38 - 63 microns) |
| Viscosity | 86 - 90 KU |
| Thinning | Not normally recommended, sparingly with mineral spirits (78001) for spray applications |
| Cleanup | A rinse with mineral spirits (78001) is recommended for spray equipment or brushes and rollers to remove residual alkyd resin that have dried on the tools. |
| Shelf life | 3 years maximum, unopened |
| Storage conditions | 4°C (40°F) - 32°C (90°F) Keep from freezing |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Prime Solution Int/Ext Stain Blocking Primer, Alkyd
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 15130 - PrimeSolution Interior/ Exterior Alkyd Stain Blocking Primer (English)
Product safety and handling information.
SDS - 15131 - PrimeSolution Interior/ Exterior Alkyd Stain Blocking Primer Deep Base (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
An alkyd stain-blocking primer for interior and exterior woodwork and siding. It seals the surface and helps control tannin staining from woods such as cedar and redwood before topcoating.
Where to use it
New or previously painted woodwork, plywood, particleboard, oriented strand board and dimensional lumber.
Recommended uses
New or previously painted woodwork, plywood, particleboard, oriented strand board and dimensional lumber.
Exterior siding Priming & sealing Trim, doors & windows- Finish
Primer - Sealer
- Coverage
359 - 598 ft² per gallon (8.8 - 14.6 m²/L)
- Application method
Brush: Use a pure bristle brush Roller: Use a 10 - 20mm nap synthetic cover H.V.L.P Spray: 10 psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .015” - .019”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 45 min
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 2 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product Code
- 15130
- Sheen
- Primer - Sealer
- Category
- Primer, Sealer, Undercoat
- Chemistry
- Alkyd
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 56%
- Weight solids
- 75%
- Density
- 12.71 lbs per gallon. Container extra
- Film thickness
- Wet: 2.0 - 3.3 mils (50 - 84 microns) Dry: 1.5 - 2.5 mils (38 - 63 microns)
- Viscosity
- 86 - 90 KU
- Thinning
- Not normally recommended, sparingly with mineral spirits (78001) for spray applications
- Cleanup
- A rinse with mineral spirits (78001) is recommended for spray equipment or brushes and rollers to remove residual alkyd resin that have dried on the tools.
- Shelf life
- 3 years maximum, unopened
- Storage conditions
- 4°C (40°F) - 32°C (90°F) Keep from freezing
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Primer - Sealer
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Prime Solution Int/Ext Stain Blocking Primer, Alkyd