Prime Solution Latex Stain Blocking Primer
An interior and exterior acrylic latex primer for new or previously painted woodwork and siding. It can also seal masonry surfaces and prime galvanized metal as directed by the manufacturer.
Good products.
Local knowledge.
KNOW THE
PROJECT.
PLAN THE
DETAILS.
An interior and exterior acrylic latex primer for new or previously painted woodwork and siding. It can also seal masonry surfaces and prime galvanized metal as directed by the manufacturer.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The project.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 05130 |
|---|---|
| Sheen | Primer - Sealer |
| Category | Primer, Sealer, Undercoat |
| Chemistry | Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 37% |
| Weight solids | 51% |
| Density | 10.40 lbs per gallon. Container extra |
| Film thickness | Wet: 4.0 - 8.0 mils (102 - 203 microns) Dry: 1.4 - 2.8 mils (36 - 71 microns) |
| Viscosity | 85 - 90 KU |
| Thinning | Not normally recommended, sparingly with water for spray applications |
| Cleanup | Warm, soapy water |
| Shelf life | 3 year maximum, unopened |
| Storage conditions | 4°C (40°F) - 32°C (90°F) Keep from freezing |
KNOW BEFORE
YOU START.
Technical information.
Safety information.
Ready when you need it.
Prime Solution Latex Stain Blocking Primer
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 05130 - Prime Solution Interior/ Exterior Latex Stain Blocking Primer (English)
Product safety and handling information.
LEED CDPH Certificate
Read the manufacturer’s instructions and product information.
LEED EPD Declarations
Read the manufacturer’s instructions and product information.
LEED HPD Doc
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
An interior and exterior acrylic latex primer for new or previously painted woodwork and siding. It can also seal masonry surfaces and prime galvanized metal as directed by the manufacturer.
Where to use it
Woodwork, siding, stucco, masonry, concrete and galvanized metal.
Recommended uses
Woodwork, siding, stucco, masonry, concrete and galvanized metal.
Exterior siding Metal surfaces Priming & sealing Trim, doors & windows- Finish
Primer - Sealer
- Coverage
200 - 400 ft² per gallon (5 - 10 m²/L)
- Application method
Brush: Use a polyester brush Roller: Use a 10 - 20mm nap synthetic cover H.V.L.P Spray: 10 psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .015” - .019”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 45 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 2 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product Code
- 05130
- Sheen
- Primer - Sealer
- Category
- Primer, Sealer, Undercoat
- Chemistry
- Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 37%
- Weight solids
- 51%
- Density
- 10.40 lbs per gallon. Container extra
- Film thickness
- Wet: 4.0 - 8.0 mils (102 - 203 microns) Dry: 1.4 - 2.8 mils (36 - 71 microns)
- Viscosity
- 85 - 90 KU
- Thinning
- Not normally recommended, sparingly with water for spray applications
- Cleanup
- Warm, soapy water
- Shelf life
- 3 year maximum, unopened
- Storage conditions
- 4°C (40°F) - 32°C (90°F) Keep from freezing
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Primer - Sealer
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Prime Solution Latex Stain Blocking Primer