Sharkskin W/B EXT. Translucent Stain
Sharkskin W/B EXT. Translucent Stain is a water-based acrylic penetrating stain and sealer for wood. It highlights the grain while transparent oxide pigments help protect against UV exposure. The low-VOC formula is designed to resist weathering and mildew on the coating surface.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
Sharkskin W/B EXT. Translucent Stain is a water-based acrylic penetrating stain and sealer for wood. It highlights the grain while transparent oxide pigments help protect against UV exposure. The low-VOC formula is designed to resist weathering and mildew on the coating surface.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 72700 |
|---|---|
| Sheen | Wood Stain |
| Category | Wood Stain |
| Chemistry | 100% Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Sharkskin W/B EXT. Translucent Stain
Technical Data Sheet (English)
Read the full product requirements, application instructions and limitations.
SDS - 72700 - Sharkskin Waterbased Translucent Stain (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
Sharkskin W/B EXT. Translucent Stain is a water-based acrylic penetrating stain and sealer for wood. It highlights the grain while transparent oxide pigments help protect against UV exposure. The low-VOC formula is designed to resist weathering and mildew on the coating surface.
Where to use it
For siding, fencing, lattice, decks, patios, outdoor furniture and dimensional lumber. Cloverdale lists horizontal and vertical wood applications, including interior or exterior wood.
Preparation
Prepare the surface and confirm compatibility using the current manufacturer instructions for product 72700.
Application and limitations
The catalogue lists a VOC content below 50 g/L before thinning or colourants, theoretical coverage of 250–300 ft² per gallon (6.0–7.4 m²/L), a tack-free time of 30 minutes and a recoat time of 3 hours at 25°C and 50% relative humidity. These are reference conditions, not a full-cure time. Clean up with warm, soapy water. Read the label and safety sheet before use.
Recommended uses
Exterior wood surfaces covered by the manufacturer’s preparation and application guidance.
Cabinetry Decks Exterior siding Wood & cabinetry Wood finishing- Finish
Wood Stain
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Can function as its own primer where the technical sheet permits.
- Water-based formulation.
- Product Code
- 72700
- Sheen
- Wood Stain
- Category
- Wood Stain
- Chemistry
- 100% Acrylic Latex
- Catalogue range
- Architectural / wood finishing
Colours &
finish options.
Explore the published colour and finish information for this product.
SharkSkin water-based translucent stain colour
The current water-based 72700 technical sheet lists Cedar. The separate 725-series oil/alkyd translucent colour chart is not used for this product. Confirm any additional tint formula with our team.
- Cedar72700
- Sheen
- Wood Stain
Complete your project.
Companion products for the selected product and system.
Bennett MP-X 2.5-inch Angular Sash Brush
A synthetic brush for the specified application method.
For the brush application method listed in the coating technical sheet. Prepare the surface and apply at the required spread rate; choose a brush size suitable for the area. Brush with the grain and back-brush immediately where the wood-stain instructions require it.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Sharkskin W/B EXT. Translucent Stain