SICO ProLuxe SRD RE Exterior Translucent Wood Finish
A penetrating, translucent alkyd-oil finish for exterior wood decks, siding and railings.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A penetrating, translucent alkyd-oil finish for exterior wood decks, siding and railings.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product codes | SIK250005C; SIK250009C; SIK250045C; SIK250072C; SIK250077C; SIK250078C; SIK250085C; SIK250094C; SIK250096C |
|---|---|
| Finish options | Matte; Mat |
| Bases | Stain - custom colour |
| Available sizes | Gallon/3.78 L (01); 5 Gallons/18.9 L (05) |
| Product type | SRD RE Exterior Translucent Wood Finish |
| Finish | Translucent matte |
| Recommended uses | Bare exterior wood decks, siding, railings and deck furniture; suitable prepared vertical and horizontal wood. |
| Coating system | 1 coat |
| Coverage | 150–200 sq ft per 3.78 L on rough or weathered wood; 250–400 sq ft per 3.78 L on smooth wood or hardwoods, per coat. |
| Drying time | Touch dry: 12 hours; light foot traffic: 48 hours; heavy foot traffic and furniture: 72 hours; full cure: 7 days at 21°C. |
| Recoat time | One-coat product; follow the maintenance directions rather than adding an immediate second coat. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
SICO ProLuxe SRD RE Exterior Translucent Wood Finish
TDS – Matte – Stain - custom colour – SIK250005C + 8 codes
Codes: SIK250005C, SIK250009C, SIK250045C, SIK250072C, SIK250077C, SIK250078C, SIK250085C, SIK250094C, SIK250096C
Read the full product requirements, application instructions and limitations.
MatteStain - custom colour
SIK250005C
Codes: SIK250005C
Product safety and handling information.
MatteStain - custom colour
SIK250009C
Codes: SIK250009C
Product safety and handling information.
MatteStain - custom colour
SIK250045C
Codes: SIK250045C
Product safety and handling information.
MatteStain - custom colour
SIK250072C
Codes: SIK250072C
Product safety and handling information.
MatteStain - custom colour
SIK250077C
Codes: SIK250077C
Product safety and handling information.
MatteStain - custom colour
SIK250078C
Codes: SIK250078C
Product safety and handling information.
MatteStain - custom colour
SIK250085C
Codes: SIK250085C
Product safety and handling information.
MatteStain - custom colour
SIK250094C
Codes: SIK250094C
Product safety and handling information.
MatteStain - custom colour
SIK250096C
Codes: SIK250096C
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A penetrating, translucent alkyd-oil finish for exterior wood decks, siding and railings.
This one-coat finish highlights the wood grain and provides water repellency and UV protection. Apply to properly prepared bare wood; remove previous coatings before application. It suits both horizontal and vertical wood surfaces, with drying and coverage affected by wood texture and conditions.
Exterior project planning
- Air temperature
- 10°C to 32°C
- Surface temperature
- 10°C to 32°C
- Ideal temperature
- 20°C
- Rain-free window
- 48 hours
- Conditions after application
- 24 hours
- Maximum wood moisture
- 18%
Canadian SIK250XXXC sheet: keep air and surface at 10–32°C during application and for 24 hours afterward; ideal temperature is 20°C ±5°C. Relative humidity must not exceed 85%. Keep the surface at least 3°C above the dew point. Avoid direct sunlight. Do not apply if rain, snow, heavy dew or temperatures below 4°C are forecast within 48 hours. Wood moisture must be 12–18%. Apply one coat only; allow 48 hours before light foot traffic and 72 hours before heavy traffic or replacing furniture. Cold and humidity extend drying.
Check the air, the actual surface, overnight conditions and the full drying or curing period. The current product label takes precedence.
Recommended uses
Bare exterior wood decks, siding, railings and deck furniture; suitable prepared vertical and horizontal wood.
Exterior wood finishes- Finish
Translucent matte
- Coverage
150–200 sq ft per 3.78 L on rough or weathered wood; 250–400 sq ft per 3.78 L on smooth wood or hardwoods, per coat.
- Application method
Brush in the direction of the grain; immediately back-brush any roller or spray application as directed in the technical sheet.
- Drying time
Touch dry: 12 hours; light foot traffic: 48 hours; heavy foot traffic and furniture: 72 hours; full cure: 7 days at 21°C.
- Recoat time
One-coat product; follow the maintenance directions rather than adding an immediate second coat.
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product codes
- SIK250005C; SIK250009C; SIK250045C; SIK250072C; SIK250077C; SIK250078C; SIK250085C; SIK250094C; SIK250096C
- Finish options
- Matte; Mat
- Bases
- Stain - custom colour
- Available sizes
- Gallon/3.78 L (01); 5 Gallons/18.9 L (05)
- Product type
- SRD RE Exterior Translucent Wood Finish
- Finish
- Translucent matte
- Recommended uses
- Bare exterior wood decks, siding, railings and deck furniture; suitable prepared vertical and horizontal wood.
- Coating system
- 1 coat
- Coverage
- 150–200 sq ft per 3.78 L on rough or weathered wood; 250–400 sq ft per 3.78 L on smooth wood or hardwoods, per coat.
- Drying time
- Touch dry: 12 hours; light foot traffic: 48 hours; heavy foot traffic and furniture: 72 hours; full cure: 7 days at 21°C.
- Recoat time
- One-coat product; follow the maintenance directions rather than adding an immediate second coat.
Colours &
finish options.
Explore the published colour and finish information for this product.
SICO ProLuxe SRD RE Exterior Translucent Wood Finish colours
Only colours listed for this product are included. Wood species, preparation and coats affect the result.
Natural Oak005
Dark Oak009
Mahogany045
Butternut072
Natural078
Teak085
Ebony094
Fog Grey096
Screen colours are approximate. Confirm your choice with a physical sample. Wood species, fabric opacity, preparation and the coating system can affect the result.
- Finish
- Translucent matte
Complete your project.
Companion products for the selected product and system.
Pure China Bristle CUB (Economy) Flat Brush · CUB BRISTLE BRUSH – 50MM (2″)
A natural-bristle brush for the specified application method.
Use only for the natural-bristle brush method permitted by this product technical sheet. Choose the brush width for the work. Apply with the grain and back-brush only as directed by that wood finish’s instructions.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about SICO ProLuxe SRD RE Exterior Translucent Wood Finish