Timberlox® Waterborne Polycarbonate Varnish, Satin
A clear satin polycarbonate varnish for interior wood and engineered wood. The non-yellowing waterborne finish offers abrasion and chemical resistance with soap-and-water cleanup.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A clear satin polycarbonate varnish for interior wood and engineered wood. The non-yellowing waterborne finish offers abrasion and chemical resistance with soap-and-water cleanup.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 47014 |
|---|---|
| Sheen | Pearl or Satin |
| Category | Varnish & Clear Coat |
| Chemistry | Polycarbonate |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 26% |
| Weight solids | 28% |
| Film thickness | Wet: 4.0 - 6.0 mils Dry: 1.0 - 1.5 mils |
| Viscosity | 30 - 40 KU |
| Thinning | Not normally recommended. |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Timberlox® Waterborne Polycarbonate Varnish, Satin
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 47014 - Timberlox® Waterborne Polycarbonate Varnish, Satin (GL3) (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A clear satin polycarbonate varnish for interior wood and engineered wood. The non-yellowing waterborne finish offers abrasion and chemical resistance with soap-and-water cleanup.
Where to use it
Interior wood and engineered wood surfaces.
About this product range
Features
- Excellent abrasion and chemical resistance
- Low odour, crystal clear finish.
- Faster dry times than solvent based products.
- Meets the Environment Canada standards
Recommended Uses
For use on interior wood floors, wood furniture, shelving, cabinets, doors, trim and other woodwork.
Description
A non-yellowing Interior Polycarbonate varnish with excellent abrasion and chemical resistance in a low odour, crystal clear finish. Provides excellent adhesion and UV protection to wood and engineered wood surfaces. This product is non-flammable and resistant to hot and cold water, household chemicals and alcohol. It is an environmentally friendly product with soap and water clean-up and has much faster dry times than solvent based products. This product meets the Environment Canada national volatile organic compound emission standards for architectural varnishes.
Selected product & format
- Chemistry
- Polycarbonate
Recommended uses
Interior wood and engineered wood surfaces.
Cabinetry Floors Trim, doors & windows Wood & cabinetry Wood finishing- Finish
Pearl or Satin
- Coverage
267 - 400 ft² per gallon (6.6 - 10 m²/L)
- Application method
Brush: Use a synthetic bristle brush Roller: Use a 10 - 20mm nap synthetic cover H.V.L.P Spray: 10 psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .012” - .015”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 30 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 2 hour
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Resists chemical exposure within the limits stated in the technical sheet.
- Non-flammable formulation.
- Water-based formulation.
- Product Code
- 47014
- Sheen
- Pearl or Satin
- Category
- Varnish & Clear Coat
- Chemistry
- Polycarbonate
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 26%
- Weight solids
- 28%
- Film thickness
- Wet: 4.0 - 6.0 mils Dry: 1.0 - 1.5 mils
- Viscosity
- 30 - 40 KU
- Thinning
- Not normally recommended.
Colours &
finish options.
Explore the published colour and finish information for this product.
- Sheen
- Pearl or Satin
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Timberlox® Waterborne Polycarbonate Varnish, Satin