WeatherOne Solid Hide 100% Acrylic Stain
A solid-hide acrylic stain for vertical exterior wood surfaces. The opaque finish is designed for adhesion and hiding, with additives that slow mould and mildew growth on the stain film.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A solid-hide acrylic stain for vertical exterior wood surfaces. The opaque finish is designed for adhesion and hiding, with additives that slow mould and mildew growth on the stain film.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 72303 |
|---|---|
| Sheen | Wood Stain |
| Category | Wood Stain |
| Chemistry | 100% Acrylic Stain |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 37% |
| Weight solids | 50% |
| Density | 11.5lbs per gallon. Container extra |
| Film thickness | Wet: 4.1 - 5.4 mils (103 - 129 microns) Dry: 1.5 - 2.0 mils (38 - 68 microns) |
| Viscosity | 76 - 80 KU |
| Thinning | Not recommended. Clean water can be used to a maximum of 5% |
| Cleanup | Clean water and soap |
| Shelf life | Three years maximum, unopened |
| Storage conditions | 4°C (40°F) - 32°C (90°F) Keep from freezing |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
WeatherOne Solid Hide 100% Acrylic Stain
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 72301 - 100% Acrylic Latex Solid Hide Stain Deep Base (English)
Product safety and handling information.
SDS - 72303 - 100% Acrylic Latex Solid Hide Stain (English)
Product safety and handling information.
SDS - 72304 - 100% Acrylic Latex Solid Hide Stain Neutral Base (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
A solid-hide acrylic stain for vertical exterior wood surfaces. The opaque finish is designed for adhesion and hiding, with additives that slow mould and mildew growth on the stain film.
Where to use it
Vertical wood siding, wood composites, shingles, trim and fascia.
Recommended uses
Vertical wood siding, wood composites, shingles, trim and fascia.
Exterior siding Trim, doors & windows Wood & cabinetry Wood finishing- Finish
Wood Stain
- Coverage
300 - 400 ft² per gallon (7.4 - 8.8 m²/L)
- Application method
Brush application preferred. Brush: Use a nylon / polyester brush Roller: Use a 3/8” - 3/4” nap synthetic cover Airless Spray: Pressure 2000 psi, Tip .013” - .017”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 45 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 6 Hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Can function as its own primer where the technical sheet permits.
- Product Code
- 72303
- Sheen
- Wood Stain
- Category
- Wood Stain
- Chemistry
- 100% Acrylic Stain
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 37%
- Weight solids
- 50%
- Density
- 11.5lbs per gallon. Container extra
- Film thickness
- Wet: 4.1 - 5.4 mils (103 - 129 microns) Dry: 1.5 - 2.0 mils (38 - 68 microns)
- Viscosity
- 76 - 80 KU
- Thinning
- Not recommended. Clean water can be used to a maximum of 5%
- Cleanup
- Clean water and soap
- Shelf life
- Three years maximum, unopened
- Storage conditions
- 4°C (40°F) - 32°C (90°F) Keep from freezing
Colours &
finish options.
Explore the published colour and finish information for this product.
WeatherOne solid-hide stain colours
Published solid-hide references. Cloverdale also offers custom matches in suitable bases; confirm your colour and formula before ordering.
- Standard WhiteEX083
- CedarEX100
- HeatherEX183
- AvocadoEX191
- Forest GreenEX193
- Autumn SandEX201
- StonehedgeEX209
- Iron CladEX217
- Sheen
- Wood Stain
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about WeatherOne Solid Hide 100% Acrylic Stain