CLASSIC 1
The starting coat in Sansin’s Classic system when natural wood tones are required.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
The starting coat in Sansin’s Classic system when natural wood tones are required.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the detailsThe surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product codes / variants | 01000 · CLASSIC; 1 Low Lustre; 0 Base |
|---|
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
CLASSIC 1
Sansin Classic Product Data Sheet
Read the full product requirements, application instructions and limitations.
Sansin Classic 1 Safety Data Sheet.
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Full product details, applications & manufacturer specifications
The starting coat in Sansin’s Classic system when natural wood tones are required.
This penetrating, breathable finish is intended for exterior wood, including log and timber construction, with a natural low-lustre appearance. For clearer, lighter tones, Sansin identifies Foundation as an alternative starting coat. Periodic cleaning and maintenance coats form part of the system’s upkeep.
Recommended uses
Exterior & decks Exterior siding Exterior wood- Coverage
160-200 sq.ft/USgal 200-300 sq.ft/USgal 250-350 sq.ft/USgal
- Drying time
Drying Time to touch @ 20ºC (68ºF): 6-8 Hours
- Recoat time
Drying Time between applications @20ºC (68ºF): 24 Hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product codes / variants
- 01000 · CLASSIC; 1 Low Lustre; 0 Base
Colours &
finish options.
Explore the published colour and finish information for this product.
CLASSIC 1 colour references
Choose the formula and coating schedule for the wood, exposure and opacity. A physical sample and the correct tint base are required. Topcoat colours must suit the underlying finish.
DRIFTWOOD 03Exterior Natural
BANFF BROWN 1102Exterior Natural
SUNDANCE 1132Exterior Natural
MUSHROOM 28Exterior Translucent
ARMY GREEN 98Exterior Translucent
CHANTRELLE 2041Exterior Translucent
MULBERRY 2053Exterior Translucent
SEPIA 2107Exterior Translucent
Screen colours are approximate. Confirm your choice with a physical sample. Wood species, fabric opacity, preparation and the coating system can affect the result.
Product & project gallery
Complete your project.
Companion products for the selected product and system.
MULTI-WASH
Clean an existing finished wood surface before a maintenance coat.
For maintenance cleaning, use the label dilution, test first and rinse thoroughly. Let the surface dry before coating; cleaning does not replace stripping or sanding when needed.
CLASSIC 2
Continue a natural-tone Classic system with the second coat.
Classic 1 is used for natural wood tones. Other colour groups may start with Classic 2 instead; confirm the selected formula and schedule.
CLASSIC 3
Finish the selected Classic coating system with Classic 3.
Natural wood tones use the Classic 1–2–3 sequence. Other colours may use Classic 2 followed by Classic 3. Follow the current colour-specific schedule.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about CLASSIC 1